Black & Decker MO1211SBC 1100W Manuel d'utilisation et d'entretien Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 17
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
11
10
ENGLISH
TO SET THE CLOCK
1) Touch clock symbol.
2) Use the number pad to enter the correct time.
3) Touch clock pad again.
Note: When the microwave oven is first plugged in or when power resumes
after a power interruption, the display will show Enter Clock Time. If you prefer
to have the clock displayed, touch clear. If you wish to check the time while
cooking is in progress, touch the Clock pad.
SETTING THE TIMER
1) Touch TIMER.
2) Enter amount of time by touching the number pad.
3) Touch START / STOP (I/O).
Note: Time countdown can be seen for 5 seconds before clock or cooking time
is returned to display. Touch Timer and then touch Clear to cancel Timer during
timing process.
SETTING A COOKING PROGRAM
One Stage Cooking
1) Use the number pad to set a cooking time. Set microwave for any time up to
99 minutes and 99 seconds.
2) Power Level is automatically set to Power Level 10 (1,0), but you may modify
for more flexibility.
3) Touch COOK (select for lower power level).
4) Enter amount of time by touching the number pad.
5) Select Power Level (see chart below).
6) Touch START / STOP (I/O) to start cooking.
Note: Use single digits to set a cooking power level.
Number Pad Cooking Power
1,0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
Below are some examples for using the different power levels:
High (10) Fish / Bacon / Vegetables / Boiling Liquids
Med High (7) Meat / Poultry / Casseroles / Reheating
Med (5) Slow Cooking / Tender Cuts of Meat
Low (2 or 3) Simmering / Sauces
Warm (1) Softening Butter
Two Stage Cooking
Some recipes require different stages of cooking at different temperatures.
1) Set Stage 1: follow steps 1 and 2 in “One Stage Cooking”. Do Not Touch
START / STOP (I/O).
2) Set Stage 2: Touch COOK then enter proper cooking time and (lower)
Power Level (most 2-Stage recipes use lower power for second stage).
3) Touch START / STOP (I/O).
Note: Once cooking is completed, the microwave oven will beep and show
“END” on the display. The beep will continue to sound every two minutes
automatically until the door is opened or any pad is touched.
To ensure safe and efficient operation, please be certain to keep the inner
door, door seal, hinges and latches clean and free from food residue.
SPEED DEFROST
1) Touch SPEED DEFROST.
2) Enter desired defrosting time by touching number pad. Digital timer sets
minutes and seconds from left to right so a single digit can be set (5 for
5 seconds) or up to 4 digits (2405 for 24 minutes 5 seconds).
3) Touch START / STOP (I/O).
Note: Once cooking is completed, the microwave oven will beep and show
“END” on the display. The beep will continue to sound every two minutes
automatically until the door is opened or any pad is touched.
After setting SPEED DEFROST, oven can be programmed to automatically
switch to one or two-stage cooking.
For SPEED DEFROST and One Stage cooking, follow steps above. Before
touching START / STOP (I/O), touch COOK, enter time and power level. Then
touch START / STOP (I/O).
For SPEED DEFROST and Two Stage cooking, follow steps above. Before
touching START/STOP, enter Two Stage cooking programs.
For model MO1900BC, during cooking,the system will pause automatically
and sound to remind users to turn meat over,after that touch STAR/STOP to
resume cooking.
COOK BY WEIGHT
1) Touch COOK BY WEIGHT.
2) Enter the one digit code by touching the correct number pad (see below)
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Commentaires sur ces manuels

Pas de commentaire