Black & Decker PSL12 Manuel d'instructions télécharger pdf (Page 10)

OTE: This tool has no provision to lock the switch in the ON position, and should

never be locked in the ON position by any other means.

USING THE CLAW (FIGURE F)

To release claw (7):

• Pull back on claw release button (5).

This will release the claw. Once claw is

released you can let go of button.

• Push in on lock-off button (4) and

squeeze the on/off switch (3).

• With the saw running, the claw will rotate

forward until it comes in contact with the

workpiece.

• Once the cut is complete, the claw will

rotate fully back to the stop position.

BLADE INSTALLATION AND REMOVAL (FIGURE G)

CAUTION: Make sure the lock-off button is engaged to prevent switch actuation

before making any adjustments or removing or installing attachments or accessories.

The blade should extend past the shoe and the thickness of the workpiece during the

cut. Select the blade best suitable for the material to be cut and use the shortest blade

suitable for the thickness of the material.

WARNING: Cut hazard. Blade breakage may occur if the blade does not extend past

the shoe and the workpiece during the cut. Increased risk of personal injury, as well as

damage to the shoe and workpiece may result.

TO INSTALL BLADE INTO SAW

1. Point tool away from body.

2. Rotate blade clamp release lever (8) in

the direction shown in figure G.

3. Insert blade shank fully into blade clamp.

4. Release blade clamp release lever (8) to

lock blade into position.

TO REMOVE BLADE FROM SAW

WARNING: Burn hazard. Do not touch

the blade immediately after use. Contact

with the blade may result in personal injury.

1. Rotate blade clamp release lever (8) in

the direction shown in figure G.

2. Remove blade.

3. Release the blade clamp release lever (8).

TRIMMING BRANCHES

• Make sure the tool is running at full

speed before making a cut.

• Hold the tool firmly in place to avoid possible bouncing or sideways movement of

the tool.

1 2 ... 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire

Black & Decker PSL12 Manuel d'instructions Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker PSL12