Black & Decker HG1300 Manuel d'instructions télécharger pdf (Page 2)

Important Safety Warnings and Instructions

WARNING: When using electric tools, basic safety precautions should always be

followed to reduce risk of fire, electric shock, and personal injury, including the following.

READ ALL INSTRUCTIONS

TO REDUCE RISK OF INJURY:

• Before any use, be sure everyone using this tool reads and understands all safety

instructions and other information contained in this manual.

• Save these instructions and review frequently prior to use and in instructing others.

General Safety Warnings and Instructions for All Tools

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.

• CONSIDER WORK AREA ENVIRONMENT. Donʼt expose power tools to rain. Donʼt use

power tools in damp or wet locations. Keep work area well lit. Do not use in presence of

flammable liquids or gases. Motors in these tools normally spark, and the sparks may

ignite the fumes.

• GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces.

For example; pipes, radiators, ranges, refrigerator enclosures. Use extreme caution when

drilling, driving, or cutting into walls, floors, ceilings or other areas or wherever live

electrical wires may be contacted, do not touch any metal parts of the tool. Hold the tools

only by the plastic handle to prevent electric shock.

• KEEP CHILDREN AWAY. Do not let children and visitors contact tool or extension cord.

All children and visitors should be kept away from work area.

• STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-

up place–out of reach of children.

• DONʼT FORCE TOOL. It will do the job better and safer at the rate for which it was

intended.

• USE RIGHT TOOL. Donʼt force small tool or attachment to do the job of a heavy-duty

tool. Donʼt use tool for purposes not intended.

• DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in

moving parts. Heavy duty gloves to protect hands and non-skid footwear are

recommended when working outdoors. Wear protective hair covering to contain long hair.

• USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Use safety goggles or

safety glasses with side shields, complying with applicable safety standards and, when

needed, a face shield. Also use face or dust mask if cutting operation is dusty. This

applies to all persons in the work area. Also use a hard hat, hearing protection, gloves,

safety shoes and dust collection systems when specified or required.

• DONʼT ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle.

Keep cord from heat, oil, and sharp edges.

• SECURE WORK. Use clamps or a vise to hold work. Itʼs safer than using your hand and it

frees both hands to operate tool.

• DONʼT OVERREACH. Keep proper footing and balance at all times.

• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer

performance. Follow instructions for lubricating and changing accessories. Inspect tool

cords periodically and if damaged, have repaired by authorized service facility. Inspect

extension cords periodically and replace if damaged. Keep handles dry, clean, and free

from oil and grease.

• DISCONNECT TOOLS. Unplug the tool when not in use, when moving tool from place to

place, before servicing, and when changing accessories (such as blades, bits, cutters) or

making adjustments.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that

keys and adjusting wrenches are removed from tool before turning it on.

• AVOID UNINTENTIONAL STARTING. Donʼt carry tool with finger on switch. Be sure

switch is off when plugging in.

• OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension

cords intended for use outdoors and so marked.

• STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when

you are tired or otherwise impaired.

• CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is

damaged should be carefully checked to determine that it will operate properly and

1 2 3 4 5 6 7 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Black & Decker HG1300 Manuel d'instructions Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker HG1300