Black & Decker 385932-02 Manuel d'instructions télécharger pdf (Page 4)

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use tool while tired or under

the influence of drugs, alcohol, or medication. A moment of

inattention while operating power tools may result in serious

personal injury,

• Dress properly. Do not wear loose clothing or jewelry. Contain

long hair. Keep your hair, clothing, and gloves away from moving

parts. Loose clothing, jewelry, or long hair can be caught in moving

parts. Air vents often cover moving parts and should also be

avoided.

• Avoid accidental starting. Be sure switch is off before plugging

in. Carrying tools with your finger on the switch or plugging in tools

that have the switch on invites accidents.

• Remove adjusting keys or switches before turning the tool on.

A wrench or key that is left attached to a rotating part of the tool

may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times.

Proper footing and balance enables better control of the tool in

unexpected situations.

• Use safety equipment. Always wear eye protection. Dust mask,

non-skid safety shoes, hard hat, or hearing protection must be

used for appropriate conditions.

TOOL USE AND CARE

• Use clamps or other practical way to secure and support the

workpiece to a stable platform. Holding the work by hand or

against your body is unstable and may lead to loss of control.

• Do not force tool. Use the correct tool for your application. The

correct tool will do the job better and safer at the rate for which it is

designed.

• Do not use tool if switch does not turn it on or off. Any tool

that cannot be controlled with the switch is dangerous and must be

repaired.

• Disconnect the plug from the power source before making

any adjustments, changing accessories, or storing the tool.

Such preventative safety measures reduce the risk of starting the

tool accidentally.

• Store idle tools out of reach of children and other untrained

persons. Tools are dangerous in the hands of untrained users.

• Maintain tools with care. Keep cutting tools sharp and clean.

Properly maintained tools, with sharp cutting edges are less likely

to bind and are easier to control.

• Check for misalignment or binding of moving parts, breakage

of parts, and any other condition that may affect the tools

operation. If damaged, have the tool serviced before using. Many

accidents are caused by poorly maintained tools.

• Use only accessories that are recommended by the

manufacturer for your model. Accessories that may be suitable

for one tool, may become hazardous when used on another tool.

SERVICE

•Tool service must be performed only by qualified repair

personnel. Service or maintenance performed by unqualified

personnel could result in a risk of injury.

• When servicing a tool, use only identical replacement parts.

Follow instructions in the Maintenance section of this manual. Use

of unauthorized parts or failure to follow Maintenance Instructions

may create a risk of electric shock or injury.

Additional Safety Rules

• Hold tool by insulated gripping surfaces when performing an

operation where the cutting tools may contact hidden wiring or its

own cord. Contact with a “live” wire will make exposed metal parts

of the tool “live” and shock the operator.

• Keep handles dry, clean, free from oil and grease. It is

recommended to use rubber gloves. This will enable better control

• DO NOT TOUCH ANY METAL PARTS OF THE TOOL when

drilling or driving into walls, floors or wherever live electrical

wires may be encountered. Hold the tool only by insulated

grasping surfaces to prevent electric shock if you drill or drive into

a live wire.

English

385932-02/NStar220 Drills.rev 7/2/02 3:49 PM Page 1

1 2 3 4 5 6 7 8 9 ... 22 23

Commentaires sur ces manuels

Pas de commentaire

Black & Decker 385932-02 Manuel d'instructions Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker 385932-02