Black & Decker X810 Manuel d'instructions télécharger pdf (Page 6)

English

-6-

Warning! Never ﬁll above the maximum

ﬁlling level (9). Normal tap water can be

used, but if you live in a hard water area the

use of distilled water is recommended.

• Do not use chemically descaled water.

Use

Warning! Do not leave the appliance

unattended while it is connected to the

power supply and during the cool down

period.

Temperature setting

The required temperature setting depends

on the garment fabric.

• Adjust the temperature control dial (4) to

the required setting:

1 Silk / Nylon

2 Acctate / Acrylic

3 Polyester / Rayan

4 Cotton / Blends

5 Wool

6 Cotton

7 Linen

• If you are unsure of the ﬁbre content of

a garment, start with a low temperature

setting and test on a small area (seam

or inside hem). If wrinkles remain,

gradually increase the heat setting until

you ﬁnd the optimum setting.

Using as a dry iron

• Stand the appliance on its heel rest (6).

• Plug the appliance in and switch on.

• Set the steam control dial (2) to the 'O'

position.

• Adjust the temperature control dial (4) to

the required setting.

The heating light (5) will switch off when the

appliance has reached the required

temperature.

Using as a steam iron

• Fill the water tank as described above.

• Stand the appliance on its heel rest (6).

• Plug the appliance in and switch on.

• Adjust the temperature control dial (4) to

the required steam setting.

The heating light (5) will switch on. When

the heating light switches off, the iron will

be ready for use as a steam iron. The

heating light will regularly switch on and off

whilst ironing.

• To create steam, set the steam control

dial (2) to the required steam position.

Using the steam burst button

The steam burst feature can only be used

whilst ironing on a high temperature setting.

• Make sure that there is water in the tank

and the temperature control dial (4) is

set to the steam position.

• Lift the appliance and press the steam

burst button (3). You may need to press

a few times to activate the pump.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Commentaires sur ces manuels

Pas de commentaire