Black & Decker X500 Series Manuel d'utilisateur télécharger pdf (Page 3)

POSISwitch

AX 5000 -

PRELIMINARY

STÖBER

ANTRIEBSTECHNIK

1. Notes on Safety

1 NOTES ON SAFETY

Before mounting and commissioning, be sure to read these mounting and commissioning instructions

to prevent the occurrence of avoidable problems during commissioning and/or operation.

POSISWITCH

AX 5000 of the MDS family is a supplemental module for POSIDRIVE

of the MDS family. In the

sense of DIN EN 50178 (earlier VDE 0160), it is an electrical resource of power electronics (BLE) for the

regulation of energy flow in high-voltage systems. It is exclusively intended for powering servo machines.

Handling, mounting, operation and maintenance must be performed in adherence to valid regulations and/or

legal specifications, applicable standards and this technical documentation.

This is a restricted marketing class product in accordance with IEC 61800-3. In residential areas, this product

may cause high-frequency interference for which the user may be called on to provide suitable

countermeasures.

Strict adherence to all rules and regulations must be ensured by the user.

The safety notes and specifications contained in further sections (items) must be adhered to by the user.

Caution! High touch voltage! Danger of shock! Hazardous to life!

When power is applied, the connections may not become disconnected under any circumstances. POSISwitch

AX 5000 may not be opened. Prerequisite for the correct POSISwitch

AX 5000 function is the correct

configuration and mounting of the inverter drive. The device may only be transported, installed, commissioned

and controlled by specialized personnel who are qualified for this task.

POSISwitch

AX 5000 must be installed in a switching cabinet in which the maximum ambient temperature is

not exceeded (see technical data). Avoid humidity.

Only copper wires may be used. The line cross sections to be used are listed in table 310-16 of standard NEC

at 60

C or 75

STÖBER ANTRIEBSTECHNIK GmbH + Co. KG accepts no liability for damages caused by non-

adherence to the instructions or the applicable regulations.

The motors must be equipped with integrated temperature monitoring or external motor overload protection

must be used.

POSISwitch

AX 5000 is only certified for operation on POSIDRIVE

of the MDS family.

Notes: Subject to technical changes to improve the devices without prior notice. This documentation is purely

a product description. It is not a promise of properties in the sense of warranty law.

Pay particular attention to:

• Permissible protection class: Protective ground. Operation is only permitted with regulation connection of

the protective conductor. Direct operation of the devices on IT networks is not possible.

• Installation work may only be performed when the power is disconnected. When work must be performed

on the drive, inhibit the enable of the inverter and disconnect the entire drive from the power network.

(Adhere to the 5 safety rules.)

• Discharge time of the DC link capacitors on the inverter > 5 minutes

• Do not penetrate the inside of the device with any kind of object.

• When performing mounting or any other work in the switching cabinet, protect the device from falling

objects (pieces of wire, leads, metal parts, and so on). Parts with conductive properties can cause a short

circuit on the connections (terminal strips, sockets) and device failure

• Before commissioning, make sure that the plug connectors are positioned correctly and the connections

are secured tightly with screws.

1 2 3 4 5 6 7 8 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Black & Decker X500 Series Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Fers à repasser Black & Decker X500 Series