5 6
5. Move the selector to the desired steam level (D).
6. Turn the fabric-select dial to appropriate setting (between 4 and
6) for your fabric (E). See fabric guide on the heel rest and read
garment’s label to help you determine fabric type.
• The temperature-ready light glows green until it reaches the
appropriate temperature.
• It then glows on and off during ironing. This is normal.
7. When finished ironing, turn the fabric-select dial to lowest heat
setting, move the dry/steam selector to and unplug the iron.
FOR DRY IRONING
Make sure selector is set to . If you want to empty the water,
see instructions under “Emptying Tank 2 after Ironing – Optional.”
1. Turn the fabric-select dial to the appropriate setting for your fabric. See fabric guide on
the heel rest and read garment’s label to help you determine fabric type.
• The temperature-ready light glows green until it reaches the appropriate temperature.
• It then glows on and off during ironing. This is normal.
3. When finished, unplug the iron and place it on its heel rest.
MULTI-POSITION AUTO OFF
If your iron is equipped with auto shutoff:
• Once it reaches appropriate temperature, it will turn off after
30 seconds of inactivity if left horizontally, or 8 minutes if left
in any other position (F).
• The auto shutoff light starts blinking red to let you know that the
iron has stopped heating.
• As soon as you pickup the iron, it starts heating again.
SURGE OF STEAM
• Horizontal
1. With Tank 2 filled with water to the MAX mark, turn the fabric-select dial
to at least setting 4 and wait for the temperature-ready light to go off.
2. To remove tough wrinkles, pump the button at 5-second intervals
for a concentrated blast of steam.
D
E
F
8 minutes
30 seconds
How to Use
This appliance is for household use only. It is specially designed with a 2-tank™ system.
Tank 2 is for use with water only, for steam. Tank 1 is for use with Downy Wrinkle
Releaser® liquid for spray_to smooth away the wrinkles as you iron. (The iron does not
require distilled or treated water for steam or spray.)
GETTING STARTED
Important: For warranty verification, do not remove line cord sticker.
Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use
ordinary tap water for ironing. Do not use water processed through a home softening
system.
Important: For optimum performance, let the iron stand for 90 seconds before beginning
to iron.
FOR STEAM IRONING
Filling Tank 2 with Water
1. Open the water-fill cover (A).
2. Tilt the iron and using a clean measuring cup, pour water into
opening until the water reaches the MAX level mark on the
water tank (B). Do not overfill.
Important:
• Do not pour any Downy Wrinkle Releaser® liquid, into Tank 2
as it will damage your iron and potentially stain your clothes
once the fluid is heated.
• If you accidentally pour this liquid into Tank 2, empty the tank
(refer to Empting Water Tank instructions) then refill the tank
with regular water.
• Use the self-cleaning feature; see Self-Cleaning instructions.
3. Close the water-fill cover.
4. Plug in the iron. The temperature-ready light glows green (C).
Tip: If unsure of a garment’s fiber, test a small area (on an inside
seam or hem) before ironing.
A
B
C
(13 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels