Black & Decker F611 Manuel d'utilisateur télécharger pdf (Page 9)

Allow the iron to cool completely. Wipe the outer shell

and SilverStone

† Soleplate finish with a cloth dampened

in water and a mild household detergent. Never use

abrasive, heavy-duty cleansers or scouring pads. After

cleaning, steam iron on an old, cotton terry cloth towel for

approximately 2 minutes.

CLEANING THE

OUTSIDE SURFACES

CARE OF THE IRON

EMPTYING THE IRON

Turn the Temperature Selector Dial to

the Indicator Mark for O/Fill, set the

Adjustable Steam Dial to the Indicator

Mark for the Dry position, and unplug

the iron. Empty the water by holding the

iron over a sink with the tip pointing

downward (Figure H). Water will empty

out the Water Fill Hole.

SELF CLEANING

About once a month use the Self Clean feature to flush

out water, minerals, and lint. If lint is allowed to

accumulate in the vents, it can scorch and cause

troublesome brown spotting. Do not be alarmed if hissing

and spitting occurs while self cleaning. This is normal.

With the Water Tank filled to the Self Clean Level and the

iron sitting on its heel rest, turn the Temperature Selector

to the highest temperature setting and push the PUSH ON

Button. The Steam/Dry Dial can be in either position. Turn

the Temperature Selector to O/Fill and unplug the iron.

† DuPont SilverStone

premium No-Stick surface

Figure H

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Black & Decker F611 Manuel d'utilisateur Page 9