Black & Decker AS145 Manuel d'utilisation et d'entretien télécharger pdf (Page 3)

Product may vary slightly from what is illustrated.

1. Spray nozzle

2. Water-fill cover

3. Dry/Steam and self-cleaning selector

4. Spray button

5. Surge-of-Steam button

6. Power and auto shutoff indicator light

7. Comfort-Grip™ handle

8. Heel rest

9. Fabric guide

10. Temperature-ready light

11. Fabric select dial

12. Water window

13. Soleplate

How to Use

This appliance is for household use only.

Before first use, remove any labels, stickers or tags attached to the body or soleplate of the

iron.

Note: Use ordinary tap water for ironing. Do not use water processed through a home

softening system.

1. Press down the water-fill cover to open. Tilt the iron and using a clean measuring cup,

pour water into opening until water reaches the MAX level mark on the water window. Do

not overfill.

2. Press up the water-fill cover to close.

3. Plug in the iron. The power indicator light comes on.

Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before

ironing.

Important: For optimum performance, let the iron stand until the indicator light goes out

(approximately 60 to 90 seconds) before beginning to iron.

FOR STEAM IRONING

1. Move the selector to the desired steam level (A).

2. Turn the fabric select dial to appropriate setting (between 4 and 6)

for your fabric (B). See fabric guide on the heel rest and read

garment’s label to help you determine fabric type. The temperature

ready light glows until it reaches the appropriate temperature.

It then cycles on and off during ironing.

3. When finished ironing, turn the fabric-select dial to lowest heat

setting, move the selector to ( ) and unplug the iron.

FOR DRY IRONING

1. Make sure selector is set to DRY ( ). You may want to empty the water (see “Emptying

Water Tank After Ironing”).

2. Turn the fabric select dial to the appropriate setting for your fabric. See fabric guide on the

heel rest and read garment’s label to help you determine fabric type.

10-MINUTE AUTO SHUTOFF

If you leave the iron on its heel rest without moving it, the iron will automatically shut off

after 10 minutes. The auto shutoff indicator light blinks to let you know that the iron has

stopped heating. To turn it back on, move the iron until it starts heating again.

SURGE OF STEAM

1. With the water tank filled to the MAX mark, turn the temperature dial to at least setting 4

and let iron stand on its heel rest about 60 seconds.

2. To remove tough wrinkles, pump the surge-of-steam button ( ) a few times at 5-second

intervals for a concentrated blast of steam.

Vertical

1. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed

once they are hung.)

2. Move the selector to MAX.

3. Hold the iron close to, but not touching, the fabric.



























AS150Pub10000003298 10/10/06 10:04 AM Page 4

1 2 3 4 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire

Black & Decker AS145 Manuel d'utilisation et d'entretien Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Fers à repasser Black & Decker AS145