Black & Decker FP1700B Manuel d'utilisateur télécharger pdf (Page 5)

CONTROL PANEL

The controls are located on the front of the base (B).

Press OFF/PULSE or ON to select a function (see

directions below).

OFF/PULSE CONTROL

• Processor should be stored in OFF position and

unplugged when not in use.

• Use PULSE for short processing tasks. This lets you

control the size and uniformity of foods being chopped.

• The OFF/PULSE button must be pressed and held for the appliance to

operate in PULSE mode. When released, the appliance will stop.

• The motor of the processor will run as long as the OFF/PULSE button is

held down. Press the button and then release to allow the blade to stop

running and the food to fall to the bottom of the workbowl.

• Pulsing gives better control when chopping, mincing, mixing and blending

foods. You can control the size of the foods, from coarse to fine.

ON CONTROL

When the ON control is selected, the processor will run continuously until

the OFF/PULSE button is pressed.

How to Use

This product is for household use only.

GETTING STARTED

• Please go to www.prodprotect.com/applica to register your warranty.

Important: Handle chopping blade and slicing and shredding disk carefully.

They are very sharp.

• Wash all removable parts as instructed in CARE AND CLEANING section

of this manual.

• Select a level, dry countertop where the appliance is to be used, allowing

air space on all sides to provide proper ventilation for the motor.

ASSEMBLING THE PROCESSOR

How to Insert and Remove the Center Post

The center post is removable:

1. Turn the bowl upside down.

2. Grasp the clear outer tabs and turn the center post

clockwise until the lower tabs are free. Lift the post

out (C).

3. To return to its original position, place center post

into smaller opening in bottom of workbowl and turn

counterclockwise until tabs snap into place.

ENGLISH

1 2 3 4 5 6 7 8 9 10 ... 23 24

Pas de commentaire

Black & Decker FP1700B Manuel d'utilisateur Page 5