Black & Decker KS900EL Manuel d'instructions télécharger pdf (Page 9)

ENGLISH

off and unplugged and that the saw blade has

stopped. Used saw blades may be hot.

Fitting and removing the saw blade (ﬁ g. B and

Warning! Before attempting any of the following

operations, make sure that the tool is switched

off and unplugged and that the saw blade has

stopped. Used saw blades may be hot.

Fitting the saw blade (ﬁ g. B)

♦ Hold the saw blade (10) as shown, with the

teeth facing forward.

♦ Push and hold the blade clamp (11) down.

♦ Insert the shank of the saw blade into the

blade holder (12) as far as it will go.

♦ Release the blade clamp (11).

Saw blade storage (ﬁ g. C)

Saw blades (10) can be stored in the storage

compartment (4) located on the side of the tool.

♦ Open the cover of the saw blade storage

compartment (4) by holding the tab on the top

of the cover and pulling it outward.

♦ The blades are retained in the compartment

by a magnetic strip. To remove a blade, press

down on one end of the blade to raise the

other end, and remove.

♦ Close the cover of the saw blade storage

compartment (4) and make sure that it is

latched closed.

Warning! Close the storage compartment door

securely before operating the saw.

Connecting a vacuum cleaner to the tool

(ﬁ g. D)

An adaptor (13) is required to connect a vacuum

cleaner or dust extractor to the tool.

♦ Push the adaptor (13) into the dust extraction

outlet (6).

♦ Connect the vacuum cleaner hose (14) to the

adaptor (13).

Cut line blower (ﬁ g. E)

♦ To aid visibility when cutting, your jigsaw is

equipped with a cut line blower (15) which will

keep the work area clear of dust as you saw.

Residual risks

Additional residual risks may arise when using the

tool which may not be included in the enclosed

safety warnings. These risks can arise from

misuse, prolonged use etc.

Even with the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These include:

♦ Injuries caused by touching any rotating/

moving parts.

♦ Injuries caused when changing any parts,

blades or accessories.

♦ Injuries caused by prolonged use of a tool.

When using any tool for prolonged periods

make sure you take regular breaks.

♦ Impairment of hearing.

♦ Health hazards caused by breathing dust

developer when using your tool (example:-

working with wood, especially oak, beech and

MDF).

Use

Adjusting the shoe plate for bevel cuts (ﬁ g. F

and G)

Warning! Never use the tool when the shoe plate

is loose or removed.

The shoe plate (7) can be set to a left or right

bevel angle of up to 45°.

♦ Pull the shoe plate locking lever (5) outwards

to unlock the shoe plate (7) from the 0 deg

position.

♦ Pull the shoe plate (7) forward and set the

required bevel 15°, 30° and 45° indicated in

the bevel angle window.

♦ Push the shoe plate locking lever (5) back

towards the saw to lock the shoe plate (7).

To reset the shoe plate (7) for straight cuts:

♦ Pull the shoe plate locking lever (5) outwards

to unlock the shoe plate (7).

♦ Set the shoe plate (7) to an angle of 0° and

push the shoe plate backwards.

♦ Push the shoe plate locking lever (5) back

towards the saw to lock the shoe plate (7).

Setting the pendulum stroke (ﬁ g. H)

♦ Set the pendulum stroke selector (9) to the

required position.

♦ Position 0: metal and aluminium and sheet

metal.

♦ Position I: for laminates, hard wood, work

tops.

♦ Position II: for plywood and PVC/Plastics.

♦ Position III: for soft wood and fast cutting.

Variable speed control

♦ Set the variable speed control knob (1) to the

required speed range.

♦ Use a high speed for wood, medium speed for

aluminium and PVC and low speed for metals

other than aluminium.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Black & Decker KS900EL Manuel d'instructions Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à chaîne sans fil Black & Decker KS900EL