Black & Decker DE40 Manuel d'instructions télécharger pdf (Page 19)

ENGLISH

5. Service

a. Have your power tool serviced by a qualified repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

Additional safety instructions for the chainsaw

Keep all parts of the body away from the saw chain when

the chainsaw is operating. Before you start the chainsaw,

make sure the saw chain is not contacting anything. A

moment of inattention while operating the chainsaw may

cause entanglement of your clothing or body with the

chainsaw.

Always hold the chainsaw wi th your right hand on the

rear handle and your left hand on the front handle.

Holding the chainsaw with the reversed hand configuration

increases the risk of personal injury and should never be

done.

Wear safety glasses and he aring protection. Further

protective equipment for head, hands, legs and feet is

recommended. Adequate protective clothing will reduce

personal injury by flying debris or accidental contact with

the saw chain.

Do not operate a chainsaw in a tree. Operation of a

chainsaw while up in a tree may result in personal injury.

Always keep proper footin g and operate the chainsaw

only when standing on fixed, secure and level surface.

Slippery or unstable surfaces such as ladders may cause a

loss of balance or control of the chainsaw.

When cutting a limb that is under tension be alert for

spring back. When the tension in the wood fibres is

released the spring loaded limb may strike the operator

and/or throw the chainsaw out of control.

Use extreme caution when cu tting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you off balance.

Carry the chainsaw by the front handle with the

chainsaw switched off and away from your body. When

transporting or storing the chainsaw always fit the guide

bar cover. Proper handling of the chainsaw will reduce the

likelihood of accidental contact with the moving saw chain.

Follow instructions for lubricating, chain tensioning and

changing accessories. Improperly tensioned or lubricated

chain may either break or increase the chance for kickback.

Keep handles dry, clean, and free from oil and grease.

Greasy, oily handles are slippery causing loss of control.

Cut wood only. Do not use chainsaw for purposes not

intended. For example: do not use the chainsaw for

cutting plastic, masonry or non-wood building materials.

Use of the chainsaw for operations different than intended

could result in a hazardous situation.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches

the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the

chainsaw which could result in serious personal injury. Do

not rely exclusively upon the safety devices built into your

chainsaw. As a chainsaw user, you should take several steps

to keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and / or incorrect

operating procedures or conditions and can be avoided by

taking proper precautions as given below:

Maintain a firm grip, with thumbs and fingers encircling

the chainsaw handles. With both hands on the chainsaw,

position your body and arm to allow you to resist

kickback forces. Kickback forces can be controlled by the

operator, if proper precautions are taken. Do not let go of

the chainsaw.

Do not overreach and do not cut above shoulder height.

This helps prevent unintended tip contact and enables

better control of the chainsaw in unexpected situations.

Only use replacement guide bars and chains specified by

the manufacturer. Incorrect replacement guide bars and

chains may cause chain breakage and/or kickback.

Follow the manufacturer's sharpening and maintenance

instructions for the saw chain. Decreasing the depth

gauge height can lead to increased kickback.

Safety recommendations for the chainsaw

We strongly recommend that first time users obtain

practical instruction in the use of the chainsaw and

protective equipment from an experienced user. Initial

practice should be completed sawing logs on a saw horse

or cradle.

We recommend that when carrying the chainsaw that you

make sure that the brake is engaged

Maintain your chainsaw when not in use. Do not store your

chainsaw for any length of time without first removing the

saw chain and guide bar which should be kept immersed in

oil. Store all parts of your chainsaw in a dry, secure place

out of reach of children.

We recommend you drain the oil reservoir prior to storage.

Be sure of your footing and pre-plan a safe exit from a

falling tree or branches.

Use wedges to help control felling and prevent binding the

guide bar and saw chain in the cut.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Black & Decker DE40 Manuel d'instructions Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Cafetières Black & Decker DE40