Black & Decker F855S Manuel d'utilisateur télécharger pdf (Page 6)

6

FILLING WITH WATER

1. Using a clean cup, pour water

into the Water Fill until the

water level reaches the top of

the Water Tank (Figure A). Do

not overfill. Refill as necessary.

2. Ordinary tap water can usually

be used for ironing. However,

do not use water processed

through a home softening

system.

3. In extremely hard water areas

(over 180 parts per million),

consider using distilled or

demineralized water. If using

distilled or demineralized water,

tap water should be used the

first time you use the iron and

once per month thereafter to

maintain steam performance.

STARTING THE IRON

1. Plug in the iron.

2. Press the ON/OFF Button

(Figure B).

3. Select the heat setting for the

fabric to be ironed. (See Fabric

Ironing Chart on page 9 or the

Heat Fabric Guide on the iron.)

4. Turn the Heat/Fabric Dial to the

Setting Indicator (Figure C).

Allow approximately 45 seconds

for the iron to preheat.

5. Unless the Power On Light is

already on, you must press the

ON/OFF Control to start the iron.

6. The iron will automatically shut

off after one hour. (Figure D).

Figure A

Figure B

Figure C

Fill

To Here ●

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Commentaires sur ces manuels

Pas de commentaire