-5-
English
As a Dough Mixer
Fit the dough blade (14) over the chopping blade
spindle (16), rotating the blade in a clockwise
direction so it locks onto the spindle.
Remove the bowl lid (9), fit the spindle & blades
onto the metal pin in the centre of the bowl. Place
the ingredients in the bowl, & re-fit the lid, making
sure the lid seal (10) is in place.
Liquid ingredients can be added to the bowl through
the chute in the lid.
Fit the bowl pusher (11) into the inlet chute in the lid.
This should be left in place during use to prevent
spills.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Note: The swivel head cannot be raised if the speed
selector (3) is in any position other than “OFF”.
Place the assembled bowl in the recess in the motor
housing (1).
Rotate the swivel head back towards the motor
housing & push it down until it latches in place.
Connect the appliance to a suitable electrical
supply.
Rotate the speed control (3) to the desired speed
until the ingredients are mixed as required then
rotate the control back to 0 to turn the appliance off.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the bowl lid, spindle & dough blade, &
transfer the ingredients to a suitable container.
The blades can be removed from the spindle by
rotating it in an anti-clockwise direction.
Note: Never use the whisk (15) to knead dough.
Note: When preparing dough, do not operate the
appliance for longer than 20 seconds. After 20
seconds use, wait at least 2 minutes before
operating the appliance again.
Note: The maximum capacity of this appliance is
800g of dough (500g of flour and 300g of water).
As a Whisk
Fit the whisk (15) over the chopping blade spindle
(16), rotating the whisk in a clockwise direction so it
locks onto the spindle.
Remove the bowl lid (9) then fit the spindle & blades
onto the metal pin in the centre of the bowl. Place
the ingredients in the bowl, & re-fit the lid, making
sure the lid seal (10) is in place.
Liquid ingredients can be added to the bowl through
the chute in the lid.
Fit the bowl pusher (11) into the inlet chute in the lid.
This should be left in place during use to prevent
spills.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Note: The swivel head cannot be raised if the speed
selector (3) is in any position other than “OFF”.
Place the assembled bowl in the recess in the motor
housing (1).
Rotate the swivel head back towards the motor
housing & push it down until it latches in place.
Connect the appliance to a suitable electrical
supply.
Rotate the speed control (3) to the desired speed
until the ingredients are mixed as required then
rotate the control back to 0 to turn the appliance off.
The pulse button (4) can be used instead of the
speed control.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the bowl lid, spindle & whisk, & transfer the
ingredients to a suitable container.
The whisk can be removed from the spindle by
rotating it in an anti-clockwise direction.
Processing Guide
Ingredients Quantity Speed Setting Time (seconds)
Meat 1,000g Max 10 to 20
Onions 700g 5 - Max 10 to 20
Nuts 600g Max 10 to 20
Fish 700g Pulse - Max 10 to 20
Cheese 700g Pulse – Max 10 to 20
Carrots 700g Pulse – Max 20
Apples 700g 5 – Max 10 to 20
Mayonnaise 4 eggs / 1 litre oil 8 - Max 20
(113 pages)
(6 pages)
(37 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels