Black & Decker HX210-B5 Manuel d'instructions télécharger pdf (Page 6)

Warning! If your product is class II double

insulated (only 2 wires in the cord set), no

connection is to be made to the earth terminal

• Follow the ﬁtting instructions supplied with

good quality plugs

• Any replacement fuse must be of the same

rating as the original fuse supplied with the

product

Mode setting

The fan heater incorporates a rotate on switch

you can select the different air by turning the

switch clockwise to:

Off

Fan only

Warm air

Hot air

Thermostat

When heating mode is selected

• Turn the thermostat knob in a clockwise

direction to the max position.

• Once the room temperature has reached the

desired temperature, turn the thermostat

knob slowly in an anti-clockwise direction

until a "click" sound is heard. That is the

setting temperature. Now, the thermostat is

switched off and the indicator light goes off.

• The thermostat will automatically maintain

the set temperature. It will switch on when

the room temperature is below and switch off

if above the setting.

• The red indicator shows that heating mode is

switched on.

Use

Your appliance is ﬁtted with a thermostat for

your safety. Using the appliance continuously for

very long periods may cause the appliance to

overheat and stop working. It is therefore

recommended that you disconnect the

appliance from the mains supply and allow to

fully cool before continuing use.

1. Place the appliance on a ﬂat, stable surface.

2. Connect it to the electricity supply.

3. Select the operating mode.

4. Set the thermostat to the required setting.

Maintenance & cleaning

• Switch the appliance off, remove the plug

from the power socket.

• The appliance is easier to clean if you do so

immediately after use.

• Do not use abrasive cleaning agents,

scourers, acetone, alcohol etc. to clean the

appliance.

• Clean the motor unit with a damp cloth.

Never immerse the motor unit in water nor rinse

it under the tap.

Technical data

6

ENGLISH

HX210

Voltage 220 – 240 Volts

Supply 50 – 60 Hz

Power consumption 2200 - 2400 W

I

II

0

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Commentaires sur ces manuels

Pas de commentaire