Black & Decker TO3290XSD Manuel d'utilisation et d'entretien télécharger pdf (Page 7)

1. Plug into outlet.

2. Display light will illuminate and all function lights will light up momentarily.

3. When turned on, the oven will either default to factory settings or to the last

setting used. (see Function Chart on page 11)

4. Choose the desired function and proceed with detailed function information

below.

Convection Baking Function |

Display will blink until desired temperature setting is met. Timer will not start

until the oven is preheated.

1. Press the Convection Baking function button ( ). The blue light will

illuminate.

2. The oven will either default to factory function settings or to the last setting

used. (see Function Chart on page 10)

3. If needed, press the temperature buttons (

) to select the desired

temperature. Up arrow for a higher temperature, and down for a lower

temperature.

4. If needed, press the timer buttons (

) to select the desired time. Up arrow

for a longer time period, and Down for a shorter time period. Select Stay On

( ) by pressing the Down arrow past Zero. The Stay On icon ( ) will

show in the display panel.

5. Press the Start/Stop button (I/0) to begin heating the oven. Display will blink

while oven is preheating.

6. Once it’s preheated there will be an audible beep and the display will stop blinking;

Place the food in the oven on the middle or low rack position to begin baking.

Note: Use a metal, oven-tempered glass, or ceramic baking dish.

7. If using the oven timer, there will be an audible beep once the baking cycle is

complete and the oven will stop heating. If not using the timer, press the Start/

Stop Button (I/0) once cooking cycle is complete.

8. Unplug the appliance when not in use.

OPERATING YOUR OVEN

1 2 3 4 5 6 7 8 9 10 11 12 ... 45 46

Pas de commentaire

Black & Decker TO3290XSD Manuel d'utilisation et d'entretien Page 7