Black & Decker TO3290XSD Manuel d'utilisation et d'entretien Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 46
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
10
Frozen Snacks |
Display will blink until desired temperature setting is met. Timer will not start until the
oven is preheated.
1. Press the Frozen Snacks function button (
). The blue light will illuminate.
2. When turned on, the oven will either default to factory settings or to the last
setting used. (see Function Chart on page 11)
3. If needed, press the temperature button (
) to select the desired
temperature. Up arrow for a higher temperature, and Down for a lower
temperature.
4. If needed, press the time buttons (
) to select the desired time. Up
arrow for a longer time period, and Down for a shorter time period.
5. Press the Start/Stop button (I/0) to begin heating the oven. Display will blink
while oven is preheating.
6. Once it’s preheated there will be an audible beep and the display will stop
blinking; Place the food in the oven on the middle or low rack position to begin
baking.
Note: Use a metal, oven-tempered glass, or ceramic baking dish placed on the
middle or low rack position.
7. There will be an audible beep once the frozen snack cycle is complete and the
oven will stop heating.
8. Unplug appliance when not in use
OPERATING YOUR OVEN
Pizza |
Display will blink until desired temperature setting is met. Timer will not start until the
oven is preheated.
1. Press the Pizza function button (
). The blue light will illuminate.
2. The oven will either default to factory function settings or to the last setting
used. (see Function Chart on page 11)
3. If needed, press the temperature button (
) to select the desired temperature.
Up arrow for a higher temperature, and Down for a lower temperature.
4. If needed, press the time buttons (
) to select the desired time. Up arrow for
a longer time period, and Down for a shorter time period.
5. Press the Start/Stop button (I/0) to begin heating the oven. Display will blink
while oven is preheating.
6. Once it’s preheated there will be an audible beep and the display will stop
blinking. Place the food in the oven, directly on the rack, in the middle or
low rack position to begin baking.
7. There will be an audible beep once the pizza cycle is complete and the oven
will stop heating.
8. Unplug appliance when not in use.
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Commentaires sur ces manuels

Pas de commentaire