Black & Decker CS718-AE Manuel d'instructions télécharger pdf (Page 5)

e) Do not overreach. Keep proper

footing and balance at all times. This

enables better control of the power

tool in unexpected situations.

f) Press properly. Do not wear loose

clothing or jewellery.

Keep your hair, clothing and gloves

away from moving parts. Loose

clothes, jewellery or long hair can be

caught in moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly used.

Use of these devices can reduce dust

related hazards.

4) Power tool use and care

a) Do not force the power tool.

Use the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be

controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the

power source before making any

adjustments, changing accessories,

or storing power tools. Such

preventive safety measures reduce

the risk of starting the power tool

accidentally.

d) Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

the power tool. Power tools are

dangerous in the hands of untrained

users.

e) Maintain power tools. Check

for misalignment or binding of

moving parts, breakage of parts

and any other condition that may

affect the power tools operation.

If damaged, have the power tool

repaired before use. Many accidents

are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are

less likely to bind and are easier to

control.

g) Use the power tool, accessories

and tool bits etc., in accordance

with these instructions and in the

manner intended for the particular

type.

5) Service

a) Have your power tool serviced by

a qualified repair person using only

identical replacement parts

.This will

ensure that the safety of the power

tool is maintained.

Additional Safety Instructions

a) Young children and the infirm.

This appliance is not intended for use

by young children or infirm persons

without supervision. Young children

should be supervised to

ensure that they do not play with

this appliance.

b) Replacement of the supply cord.

If the supply cord is damaged, it must

be replaced by the manufacturer or

an authorised Black & Decker Service

Centre in order to avoid a hazard.

5

1 2 3 4 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire