10
ENGLISH
(Original instructions)
Warning! Be sure to use appropriate personal protective
equipment.
Warning! Before performing any maintenance or cleaning on
corded appliances switch off and unplug the appliance.
Warning!
enough vapours to ignite (see paint supplier instructions).
Warning! Make sure clean up area is well ventilated and free
Warning! Always spray outdoors when spraying cleaning
solution through sprayer.
Warning! Do not submerse power unit.
u Turn the power unit off, unplug the cord and disconnect air
hose from sprayer.
u Unscrew the lid from the side of the canister and pour any
u Pour a small amount of the appropriate cleaning solution
into the canister.
t Warm soapy water for water based materials.
t Manufacturers recommended cleaning solution for oil
based materials.
u Replace the lid on the canister securely and vigorously
shake the sprayer.
u Unscrew the lid from the side of the canister and properly
dispose of cleaning solution.
u
solution. Screw lid securely on canister.
u Reattach the air hose to the sprayer, plug in the cord and
turn on the power unit.
u Spray the cleaning solution through the sprayer onto scrap
material for 2 to 3 seconds.
u Turn the power unit off, unplug the cord and disconnect air
hose from sprayer.
u
(7). Remove the pickup tube (15) and o-ring (17) from the
sprayer. Clean the parts in the appropriate cleaning solu-
u Unscrew the tip collar (19) and remove the spray nozzle
(10) and spray tip (20). Clean all parts in the appropriate
u If using water based material, clean the sprayer by running
water through pickup tube inlet. If using oil based materi-
als, clean pickup tube inlet with the appropriate cleaning
solution. Repeat until sprayer is completely clean. Take
special care to gently clean the spraying needle (21).
u Dry all parts thoroughly.
u Properly dispose of cleaning solution.
u Place a drop of household oil onto the metal ball in the
Important : Lubricating the ball in check valve (18), after
cleanup, will help to prevent it from sticking which can clog the
u
Note : The spray tip (20) can only go in one way. The notch
(22) on the spray tip must align with the recess in the threads
Cleaning the power unit
u Turn the power unit off, unplug the cord and disconnect air
hose from sprayer.
u Use only mild soap and damp cloth to clean the power
unit.
Warning! Never let any liquid get inside the power unit.
Warning! Never immerse any part of the power unit into a
liquid.
warm water and allow to air dry before re-installing or replace
if necessary.
u
the power unit.
u
u
Warning!
place. Debris could be sucked in and interfere with the func-
tion of the power unit.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ
-
mental pollution and reduces the demand for raw
materials.
(112 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels