Black & Decker BDPH200 Manuel d'instructions télécharger pdf (Page 11)

• Align the nozzle section 90 degrees to the

motor housing and press it fully into the motor

housing as shown in figure T.

• Grasp the nozzle section and twist it

downward until the pointer on the nozzle

section aligns with the lock symbol on the

motor housing (figure U).

When properly connected, the two pieces will

“snap” into place.

MAINTENANCE AND STORAGE

Use only mild soap and damp cloth to clean the power unit. Never let any liquid get

inside the power unit; never immerse any part of the power unit into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance

and adjustment (other than those listed in this manual) should be performed by

authorized service centers or other qualified service organizations, always using

identical replacement parts.

The sprayer contains a washable/reuseable filter (figure V). Check the filter

before and after each use. If dirty, wash with warm water and allow to air dry

before re-installing or replace if necessary.

• To check the filter, remove the filter cover by loosening the two screws in the

cover and pulling the cover off the sprayer. Remove the filter as shown in figure V

and inspect. Replace filter and filter cover. Snugly tighten screws. Never operate

the sprayer without the filter in place. Debris could be sucked in and interfere with

the function of the sprayer.

Make sure unit is clean and dry before storing. Store unit indoors in a dry location.

To prevent damage, wrap the electrical cord so that it is not crimped during

storage.

ACCESSORIES

Recommended accessories for use with your product are available from your local dealer or authorized service

center. If you need assistance regarding accessories, please call: 1-800-544-6986

WARNING: The use of any accessory not recommended for use with this product could be hazardous.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable

power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black

& Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—

Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com

WARNING:: Tool service must be performed only by qualified repair personnel.

WARNING: When servicing a tool, use only identical replacement parts.

WARRANTY

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The

defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased

(provided that the store is a participating retailer). Returns should be made within the time period of the retailerʼs policy

for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer

for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for

repair or replacement at our option. Proof of purchase may be required.Black & Decker owned and authorized Service

Centers are listed under "Tools-Electric" in the yellow pages of the phone directory.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Black & Decker BDPH200 Manuel d'instructions Page 11

Commentaires sur ces manuels