Black & Decker NPP2018 Manuel d'instructions télécharger pdf (Page 7)

Features

Before using your Pole Saw familiarize yourself with all operating and

safety features.

A. Handle Module

B. Center Extension

C. Saw Head Module

1. Trigger Switch

2. Lock Button

3. Battery

4. Foam Gripper

5. Threaded Pole

6. Threaded Sleeve

7. Center Extension Pole

8. Sprocket Cover (other side)

9. Allen Head Screws (other side)

10. Guide Bar

11. Saw Chain

12. Scabbard

13. Allen Wrench

14. Oil Bottle

Pole Saw Names and Terms

• Chain Brake - A device used to stop the Pole Saw.

• Drive Sprocket or Sprocket - The toothed part that drives the saw

chain.

• Guide Bar - A solid railed structure that supports and guides the

saw chain.

• Guide Bar Scabbard - Enclosure fitted over guide bar to prevent

tooth contact when saw is not in use.

• Kickback - The backward or upward motion, or both of the guide

bar occurring when the saw chain near the nose of the top area of

the guide bar contacts any object such as a log or branch, or when

the wood closes in and pinches the saw chain in the cut.

• Low-Kickback Chain - A chain that complies with the kickback

performance requirements of ANSI B175.1-1991 (when tested on a

representative sample of chain saws.

• Reduced Kickback Guide Bar - A guide bar which has been

demonstrated to reduce kickback significantly.

• Replacement Saw Chain - A chain that complies with kickback

performance requirements of ANSI B175.1-1991 when tested with

specific chain saws. It may not meet the ANSI performance

requirements when used with other saws.

• Saw Chain - A loop of chain having cutting teeth, that cut the wood,

and that is driven by the motor and is supported by the guide bar.

• Spiked Bumper (Spike) - The pointed tooth or teeth for use when

pruning to pivot the saw and maintain position while sawing.

• Switch - A device that when operated will complete or interrupt an

electrical power circuit to the motor of the chain saw.

• Switch Lockout - A movable stop that prevents the unintentional

operation of the switch until manually actuated.

• Trimming (Pruning) - Process of cutting limbs from a tree.

• Undercut - An upward cut from underside of a log or limb.This is

done while in normal cutting position and cutting with top of guide

bar.

625116-00 NPP2018 Pole 11/12/04 9:11 AM Page 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Black & Decker NPP2018 Manuel d'instructions Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à chaîne Black & Decker NPP2018