Black & Decker NPP2018 Manuel d'instructions télécharger pdf (Page 13)

Accessories

Replacement chain and bar are available from your nearest Black &

Decker service center.

Replacement chain # 623382-00

Replacement bar # 623381-00

The use of accessories not recommended in this manual may be

hazardous.

Troubleshooting Section

If your Pole Saw does not operate correctly check the following:

Problem

Possible Cause Possible Solution

• Tool will not

start.

• Unit will not

charge.

• Bar / chain

overheated.

• Battery not

installed properly.

• Battery not

charged.

• Lock-out button not

actuated.

• Pole connections

not properly

tightened.

• Battery not

inserted into

charger.

• Chain too tight.

• Lubrication

needed.

• Check battery installation.

• Check battery charging

requirements.

• Pull back on lock

button/actuate trigger.

• Refer to instruction manual

for pole connections.

• Insert battery into charger

until red LED appears.

Charge up to 8 hours if

battery totally drained.

• Refer to section on

adjusting chain tension.

• Refer to sections for chain

oiling application.

• Chain is

loose.

• Poor cut

quality.

• Chain tension set

incorrectly.

• Chain tension set

incorrectly.

• Chain needs

replacement.

• Refer to section for chain

tensioning.

• Refer to section on

adjusting chain tension.

Note: Excessive tension

leads to excessive wear

and reduction in life of bar

& chain.

Lubricate after every 10

minutes of use.

Refer to section for

installation of chain.

625116-00 NPP2018 Pole 11/12/04 9:11 AM Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Black & Decker NPP2018 Manuel d'instructions Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à chaîne Black & Decker NPP2018