Black & Decker 200 WATT Guide de dépannage Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 6
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
iii
Important Cable Information
Substantial power loss and reduced battery operating time results from inverters installed with cables that
are not able to supply full power. Symptoms of low battery power can result from cables that are either
excessively long or an insufficient gauge. Marine installations are also subjected to vibration and stresses
that exceed those of other mobile installations. Therefore, the installer/operator should be especially
aware of the requirements to maintain secure, tight, water-resistant electrical connections and to provide
for strain relief for DC cables and appliance wiring. Cable insulation must be the appropriate type for
the environment.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
To ensure reliable service, your power inverter must be installed and used properly. Please read the
installation and operating instructions thoroughly prior to installation and use. Pay particular attention to
the WARNING and CAUTION statements in this manual. The CAUTION statements advise against
certain conditions and practices that may result in damage to your inverter. The WARNING statements
identify conditions or practices that may result in personal injury.
Read All Instructions Before Using This Power Inverter!
WARNINGS
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION OR INJURY:
Do not connect to AC distribution wiring.
Remove appliance plug from outlet strip or turn off inverter before working on the
appliance. Multiple outlet power strips with switches and circuit breakers only
interrupt power to the "hot" receptacle terminals. The "neutral" terminals remain
powered with respect to the "ground" terminals.
NOT approved for ignition protected areas. Do not make any electrical connections
or disconnections in areas designated as IGNITION PROTECTED.
This is not a toy — keep away from children.
• This equipment employs components that tend to produce arcs or sparks. DO NOT
install in compartments containing batteries or flammable materials.
Use this unit in properly ventilated areas ONLY.
Do not open — there are no user-serviceable parts inside.
Do not insert foreign objects into the outlet.
Do not expose the unit to water, rain or snow.
CAUTIONS
Always inspect battery supply connections and cables to ensure they are tight and
that cable insulation is not damaged.
Do not use with positive ground electrical systems (the majority of modern
automobiles, RVs, trucks and boats are negative ground). Reverse polarity
connection will result in a blown fuse and may cause permanent damage to the
inverter and will void warranty.
• This inverter will not operate high wattage appliances or equipment that produce
heat, such as hair dryers, microwave ovens and toasters.
Grounding the Neutral will cause the inverter to shut down. Do not operate this
inverter if it is wet. Do not install in engine compartment — install in a well
ventilated area.
This inverter has not been not tested for use with medical devices.
Do not attempt to install or operate this unit while operating a motor vehicle.
FOR USAGE ABOVE 100 WATTS:
Use battery clips ONLY.
DO NOT use the DC accessory plug or the fuse will open.
VEC1045_46_47_BD_Manual 4/28/05 5:16 PM Page ii
Vue de la page 1
1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire