Black & Decker 200 WATT Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Adaptateurs et onduleurs de puissance Black & Decker 200 WATT. Black & Decker 200 WATT Instruction manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
SAFETY GUIDELINES
/ DEFINITIONS
DANGER:
Indicates an
imminently
hazardous
situation
which, if not avoided, will
result
in death or
serious
injury.
WARNING:
Indicates
a potentially hazardous
situation which, if
not avoided, could result
in death or serious
injury.
CAUTION: Indicates
a potentially hazardous
situation
which, if not avoided,
may
result
in minor or moderate
injury.
CAUTION:
Used without the
safety
alert symbol indicates
potentially hazardous
situation
which,
if
not
avoided,
may
result in property damage.
RISK
OF
UNSAFE
OPERATION.
When using
tools or equipment,
basic safety
precautions should
always
be
followed to
reduce the
risk of
personal injury. Improper
operation,
maintenance or
modification of tools
or
equipment could result in serious
injury
and property
damage. There are
certain applications for which tools
and equipment are designed. Black
&
Decker
strongly
recommends
that this product NOT
be modified and/or
used for any
application other than for which it
was designed. Read and
understand
all
warnings
and operating
instructions
before using
any tool or equipment.
IMPORTANT SAFETY
INSTRUCTIONS
GENERAL
SAFETY
WARNINGS
AND
INSTRUCTIONS
FOR
ALL
APPLIANCES
READ
ALL
INSTRUCTIONS
WARNING:
Read all
instructions
before operating
product. Failure
to follow all instructions listed
below may
result
in
electric shock,
fire and/or
serious
injury.
AVOID
DANGEROUS
ENVIRONMENTS.
Don’t use
appliances in damp
or
wet locations. Don’t use appliances
in
the
rain.
STORE
IDLE
APPLIANCES
INDOORS.
When not in
use, appliances
should
be
stored indoors in dry, and high
or
locked-up place
– out
of reach of
children.
DON’T
FORCE
APPLIANCE.
It will do
the
job better and with less likelihood of
a risk of injury
at
the rate for
which
it
was designed.
USE
RIGHT
APPLIANCE.
Do
not use
the
appliance
for any job
except
that for which
it is
intended.
DISCONNECT
APPLIANCES.
Disconnect
the appliance
from
the p
ower
supply when
not
in
use,
before
servicing, and when changing accessories such as blades and the like.
PROPER
COOLING IS
ESSENTIAL
WHEN OPERATING
THE
INVERTER.
Do not
place
the
unit near
the
vehicle’s heat vent or
in direct
sunlight.
USE
OF
ACCESSORIES
AND
ATTACHMENTS.
The use
of any
accessory or attachment
not
recommended for
use
with this appliance
could
be hazardous.
Note:
Refer to the accessory section of
this manual for further
details.
CHECK
DAMAGED
PARTS.
A
part that is damaged
should be
properly repaired or replaced by an authorized
service center.
OUTDOOR
USE
EXTENSION
CORDS.
When
an appliance plugged
into this unit is
used outdoors, use
only
extension cords intended
for use
outdoors and
so
marked. Note that th
is INVERTER is NOT
INTENDED
TO
BE
USED OUTDOORS.
EXTENSION
CORDS.
Make
sure your extension cord is
in good
condition.
When using an
extension
cord,
be
sure
to
use
one heavy enough to
carry the current
your product will
draw.
An undersized
cord
will cause
a drop in line
voltage
resulting in loss
of
power
and overheating.
The
following
table shows the
correct
size
to use
depending on cord
length and
nameplate ampere rating. If
in doubt, use the next heavier gauge. The
smaller
the
gauge number,
the heavier
the cord.
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet
120V 0-25
26-50
51-100
101-150
(0-7.6m)
(7.6-15.2m)
(15.2-30.4m)
(30.4-45.7m)
240V 0-50
51-100
101-200
201-300
(0-15.2m)
(15.2-30.4m)
(30.4-60.9m)
(60.9-91.4m)
Ampere Rating
More
Not more
American Wire Gauge
Than
Than
0 -
6
18
16
16
14
6 -
10
18
16
14
12
10
-
12
16
16
14
12
12
-
16
14
12
Not
Recommended
WARNING: This
product or its power cord contains lead,
a chemical known
to the
State of California to
cause cancer and birth
defect
or other
reproductive harm. Wash hands after handling.
WARNING:
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK:
Do
not
connect
to
AC
distribution
wiring.
VEHICLE POWER SYSTEM
500 WATT POWER INVERTER
WITH USB CHARGING PORT
INSTRUCTION MANUAL
Catalog Number PI500BB
Do not make any electrical connections or disconnections in areas designated as IGNITION
PROTECTED. This includes DC cigarette lighter type plug connection or airplane adapter. This unit
is NOT approved for ignition protected areas.
NEVER immerse the unit in water or any other liquid, or use when wet.
Do not insert foreign objects into the AC outlet or the USB outlet.
WARNING: TO REDUCE THE RISK OF FIRE:
Do not operate near flammable materials, fumes or gases.
DO NOT expose to extreme heat or flames.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
Remove appliance plug from outlet before working on the appliance.
DO NOT attempt to connect or set up the unit or its components while operating your vehicle.
Not paying attention to the road may result in a serious accident.
Always use the inverter where there is adequate ventilation. Do not block ventilation slots.
ALWAYS turn the inverter OFF by disconnecting it from the DC source when not in use.
Make sure the
nominal powering voltage is 12 volts DC, center connection positive (+).
When using this unit in a vehicle, check the vehicle owner’s manual for maximum power rating
and recommended output. Do not install in engine compartment — install in a well ventilated
area.
Do not use with positive ground electrical systems.* Reverse polarity connection will result in a
blown fuse and may cause permanent damage to the inverter and will void warranty.
*The majority of modern automobiles, RVs and trucks are negative ground.
Keep in mind that this inverter will not operate high wattage appliances or equipment that
produce heat, such as hair dryers, microwave ovens and toasters.
Do not open the inverter — there are no user-serviceable parts inside.
Do not use this inverter with medical devices. It is not tested for medical applications.
Keep away from children.This is not a toy!
Install and operate unit only as described in this Instruction Manual.
Do not use this inverter on a watercraft. It is not qualified for marine applications.
Check unit periodically for wear and tear. Take to a qualified technician for replacement of worn
or defective parts immediately.
Read And Understand This Instruction Manual Before Using This Unit.
SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF INJURY:
Follow these instructions and those published by battery manfacturer and the manufacturer of any
equipment you intend to use with this unit. Review cautionary markings on these products and on
engine.
INTRODUCTION
Thank you for purchasing the PI500BB 500 watt Power Inverter with USB Charging Port. This
inverter can be used to operate personal electronics such as: laptop computers, digital/video
cameras, MP3 players, cell phones, PDAs, and more. It can also be used to recharge 1
10/120 volt
AC devices that have an appropriate recharging adapter with a standard North American two- or
three-prong plug. Please read this Instruction Manual carefully before use to ensure optimum
performance and to avoid damage to this product.
FEATURES
The unit has 2 LED indicators, 1 to show input conditions and 1 to show output conditions.
The input LED is located beside the power button and the output LED is located on the top of the
unit between the 2 AC outlets. A green LED indicates
normal operation, a red LED indicates a
fault condition (refer to Troubleshooting Section of this manual.) and an amber LED indicates low
input voltage from the DC source. The AC and USB outlets are ready to use if you have a green
output LED.
The Power Pushbutton turns the inverter ON and OFF. It can also be used to force reset of
inverter
circuits by pressing it OFF (no LEDs are lit), then back ON again.
AC power is supplied through two standard North American three-pro
ng type outlets. The outlets
can accommodate either two- or three-pin AC plugs.
Controls and Functions
115 VOLT AC OUT-
LETS
DC ACCESSORY
OUTLET PLUG
BATTERY CLIPS
(WITH CABLES)
OUTPUT LED
INDICATOR
INPUT
LED INDICATOR
USB OUTLET
ON/OFF
POWER BUTTON
HIGH-SPEED COOLING FAN
BACK OF UNIT
(BLACK) NEGATIVE
CABLE POST
(RED) POSITIVE
CABLE POST
DC ACCESSORY
OUTLET
HOW THIS INVERTER WORKS
This inverter is an electronic device that converts low voltage DC (direct current) electricity from a
battery to 115 volt AC (alternating current) household power. In designing this inverter, Black & Decker has
incorporated design techniques previously employed in computer power supplies. The result of these design
innovations is a smaller, lighter and easier-to-use power inverter.
Power Inverter Output Waveform
NOTICE: THE OUTPUT OF THIS DEVICE IS NOT SINUSOIDAL. IT HAS A TOTAL HARMONIC DISTORTION OF
36 PERCENT AND MAXIMUM SINGLE HARMONIC OF 28 PERCENT AT 100% RATED LOAD.
IMPORTANT: This inverter output is not pure-sinusoidal. Therefore this is n
ot suitable for use to power the
following devices:
. Microwave Ovens;
. Transformerless Battery Chargers
Doing so, may cause the device to run warmer or overheat.
The AC output waveform of this inverter is known as a modified sine wave. It is a stepped waveform that has
characteristics similar to the sine wave shape of utility power. This type of waveform is suitable for most AC
loads, including linear and switching power supplies used in electronic equipment, transformers, and small
motors.
The modified sine wave produced by this inverter has an RMS (root mean square) voltage of 115 volts. Most
AC voltmeters (both digital and analog) are sensitive to the average value of the waveform rather than the
RMS value. They are calibrated for RMS voltage under the assumption
that the waveform measured will be
a pure sine wave. These meters will not correctly read the RMS voltage of a modified sine wave. Non-TRUE
RMS meters will read about 20 to 30 volts low when measuring the output of this inverter. For accurate
measurement of the output voltage of this unit, use a TRUE RMS reading voltmeter such as a Fluke 87, Fluke
8080A, Beckman 4410 or Triplett 4200.
115 Volt AC Output
CAUTION – Rechargeable Devices
Certain rechargeable devices are designed to be charged by plugging them directly into an AC
receptacle. These devices may damage the inverter or the charging circuit.
When using a rechargeable device, monitor its temperature for the initial ten minutes of use to
determine if it produces excessive heat.
If excessive heat is produced, this indicates the device should not be used with this inverter.
This problem does not occur with most battery-operated equipment. Most of these devices use a
separate charger or transformer that is plugged into an AC receptacle.
The inverter is capable of running most chargers and transformers.
OPERATING INSTRUCTIONS
The Power Inverter must be connected only to batteries with a nominal output voltage of 12 volts. The unit will
not operate from a 6 volt battery and will sustain permanent damage if connected to a 24 volt battery.
Always connect the PI500BB to the 12 volt DC power source before plugging any devices into the unit.
The standard North American 115 volt AC and USB outlets allow simultaneous operation of multiple devices.
Simply plug the equipment into the unit and operate normally. Ensure that the wattage of all equipment
simultaneously plugged into the PI500BB does not exceed 500 watts continuous.
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - INSTRUCTION MANUAL

SAFETY GUIDELINES / DEFINITIONSDANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.WARNI

Page 2 - TROUBLESHOOTING

Connection to Power SourceThe Power Inverter comes equipped with a DC Accessory Outlet Plug and Battery Clips for connection to a power source.Connect

Page 3 - SPECIFICATIONS

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our

Commentaires sur ces manuels

Pas de commentaire