Black & Decker BDPH400 Manuel d'instructions télécharger pdf (Page 10)

• Unscrew the tip collar and remove the spray

nozzle and spray tip. Clean all parts with the

cleaning brush in the appropriate cleaning

solution (figure O).

• If using water based material, clean the

sprayer by running water through pickup tube

inlet as shown in figure P. If using oil based

materials, clean pickup tube inlet with the

appropriate cleaning solution. Repeat until

sprayer is completely clean.

• Dry all parts throughly.

• Properly dispose of cleaning solution.

• Place a drop of household oil onto the metal

ball in the check valve (figure Q).

IMPORTANT: Lubricating the ball in check valve, after cleanup, will help to prevent it from sticking which can

clog the valve and prevent adequate flow of spray material.

NOTE: When reassembling, place metal ball end of check valve into sprayer.

• Reassemble sprayer (figure R). NOTE: The spray tip can only go in one way. The notch on the spray tip,

shown in figure S must align with the recess in the threads of the sprayer.

MAINTENANCE

Use only mild soap and damp cloth to clean the power unit. Never let any liquid get inside the power unit; never

immerse any part of the power unit into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those

listed in this manual) should be performed by authorized service centers or other qualified service organizations, always

using identical replacement parts.

The power unit contains a washable/reuseable filter

(figure T). Check the filter before and after each use. If

dirty, wash with warm water and allow to air dry before

re-installing or replace if necessary.

• To check the filter, remove the filter cover by pressing

in on the sides of the filter cover and pulling the cover

off the power unit. Remove the filter as shown in

figure T and inspect. Replace filter and filter cover.

Never operate the power unit without the filter in place.

Debris could be sucked in and interfere with the

function of the power unit.

STORAGE

Make sure unit is clean and dry before storing. Store unit indoors in a dry location. To prevent damage, wrap the

electrical cord so that it is not crimped during storage.

ACCESSORIES

Recommended accessories for use with your product are available from your local dealer or authorized service

center. If you need assistance regarding accessories, please call: 1-800-544-6986

WARNING: The use of any accessory not recommended for use with this product could be hazardous.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Black & Decker BDPH400 Manuel d'instructions Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Pulvérisateur de peinture Black & Decker BDPH400