Black & Decker KW800 Guide de l'utilisateur télécharger pdf (Page 5)

The heart of the R9PLUS Dovetail Jig is the beam. A typical

beam, shown below, is 30"[762mm] long. A 30"[762mm]

beam can accommodate board widths of up to 18"[457mm].

Beams can be made shorter (minimum 20"[508mm]) or

longer, in 10"[254mm] increments. Because of the template’s

unique “step over” ability, beams can be made longer to suit

any width project. The beam is equally suited to router table or

bench operation.

The following instructions will guide you through the beam

making process. Care in building the beam will ensure great

joinery every time with the R9

PLUS. In addition to these

instructions, a two page drawing, complete with all dimension

information, is provided at the end of the user guide.

Important: Please use this chapter’s step-by-step instructions

in conjunction with the technical drawing on pages 38-39 of

the Appendix.

R9PLUS BENCH OPERATION

CHAPTER 1

Making the Beam

1 2 3 4 5 6 7 8 9 10 ... 19 20

Pas de commentaire

Black & Decker KW800 Guide de l'utilisateur Page 5