Black & Decker BDN200 Manuel d'instructions télécharger pdf (Page 3)

• Never point tool at yourself or others in work

area. Serious injury or death may occur if the tool

is activated. (Fig. 3)

• Never use oxygen or other bottled gasses.

Explosion will occur. Never use combustible

gases or any other reactive gas as a power

source for this tool: explosion and serious

personal injury will result. (Fig. 4)

• Wear ear protection to safe-guard against

possible hearing loss. Ear protection equipment

must conform to ANSI S3.19 requirements. (Fig. 5)

• Use clean, dry, regulated, com-pressed air at

70 to 120 PSI, (4.8 to 8.3 BAR). (Fig. 6)

• Do not connect tool to pressure which

potentially exceeds 200 PSI (13.7 BAR).

• All air line components (hoses, connectors,

filters, regulators, etc.) must be rated for a

maximum working pressure of at least 150 PSI

(10.3 BAR) or 150% of the maximum system

pressure, which ever is greater.

• Connect tool to air supply hose with a coupling

that automatically removes all pressure from the

tool when the coupling is disconnected. (Fig. 7).

• Disconnect tool from air supply hose before

doing tool maintenance, clearing a jammed

fastener, leaving work area, moving tool to another

location, or handing the tool to another person.

(Fig. 7)

• Never use a tool that is leaking air, has missing

or damaged parts, or requires repair. Make sure

all screws and caps are securely tightened.

(Fig. 8).

• Never use tool if safety, trigger or springs

are inoperable, missing or damaged. Do not

alter or remove safety, trigger, or springs.

Make daily inspections for free movement of

trigger and safety mechanism. (Fig. 8)

Fig. 6

Fig. 5

Fig. 3

Fig. 4

Fig. 8

Fig. 7

492848-00,BDN200 NAILER 2/2/06 1:35 PM Page 3

1 2 3 4 5 6 7 8 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Black & Decker BDN200 Manuel d'instructions Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolet à clous Black & Decker BDN200