Black & Decker 3272 Manuel de service télécharger pdf (Page 3)

switches replaced by an authorised

service centre. Do not use the tool if the

switch does not turn it on and off.

 Warning! The use of any accessory or

attachment, other than recommended in this

instruction manual, may present a risk of

personal injury.

 Have your tool repaired by a qualified

person. This electrical tool is in

accordance with the relevant safety

requirements. Repairs should only be

carried out by qualified persons using

original spare parts, otherwise this may

result in considerable danger to the user.

ADDITIONAL SAFETY INSTRUCTIONS

FOR SMALL ANGLE GRINDERS

 Use the guard and ensure it is fitted

correctly.

 Check mounting flanges and the disc are

correctly fitted and are undamaged.

 Ensure you are using the correct size and

type of disc for the task.

 Ensure the disc, wire brush and sanding

accessories are rated in excess of the

spindle rpm of your angle grinder. Allow a

newly assembled wheel to idle off-load

for 30 seconds before starting any

operation.

Save these instructions!

DOUBLE INSULATION

Your tool is double insulated. This

means that all the external metal parts

are electrically insulated from the

mains power supply. This is done by

placing insulation barriers between the

electrical and mechanical components

making it unnecessary for the tool to

be earthed. Note: Double insulation does

not take the place of normal safety

precautions when operating this tool.

The insulation system is for added

protection against injury resulting from

a possible electrical insulation failure

within the tool.

ELECTRICAL SAFETY

Be sure your supply is the same as the voltage

given on the rating plate. This tool is fitted with

a two-core cord and plug.

MAINS PLUG REPLACEMENT (UK ONLY)

Should the mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact a Black &

Decker service repair agent or a qualified

electrician.

 Disconnect the plug from the power supply.

 Cut off the plug and dispose of safely. A

plug with bared copper conductors is very

dangerous if engaged in a live socket outlet.

 Only fit BS1363A approved plugs fitted

with the correctly rated fuse. Note: Fuses

do not give personal protection against

electric shock.

 The cable wire colours, or a letter, will be

marked at the connection point of most

good quality plugs. Attach the wires to their

respective points in the plug (see diagram).

Brown = L (live), blue = N (neutral).

 Before replacing the top cover of the plug

ensure that the cable restraint is holding

the outer sheath of the cable firmly and

that the two leads are correctly fixed at

the terminal screws.

 Your product is supplied with a non-

rewireable plug, if the fuse cover is missing

or damaged do not use the plug.

Connect

blue to

N (neutral)

Fit a BS1363A

approved

resilient plug

Fit a 5 amp fuse

approved

to BS1362

Connect

brown to

L (live)

Make sure that the

outer sheath of the

cable is held firmly

ba the clamp

230 volts AC only

Never use a light

socket

Warning! Never connect live or neutral wires

to the earth pin marked E or .

AUSTRALIA AND NEW ZEALAND ONLY

Should the mains pug or cordset of this

equipment be damaged it must only be replaced

by an authorised Black & Decker service agent

as special purpose tools are required.

EXTENSION CABLES

You can use up to 30m (100ft) of Black &

Decker 2-core extension cable (or 3-core

extension cable in Australia and New Zealand)

without undue loss of power.

Note: An extension cable should not be used

unless absolutely necessary. Use of an

improper extension cable could result in a risk

of fire and electric shock. If an extension cable

must be used, make sure it is properly wired

and in good electrical condition.

UNWANTED TOOLS AND THE

ENVIRONMENT

Should you find one day that the tool

needs replacement or is of no further

use, think of the protection of the

environment. Black & Decker service

agents will accept old tools and will

dispose of them in an environmentally

safe way.

THE BLACK & DECKER GUARANTEE (UK,

AUSTRALIA AND NEW ZEALAND ONLY)

If your Black & Decker product becomes

defective due to faulty materials and

workmanship, within 24 months from the date

of purchase, we guarantee to either replace

all defective parts or at our discretion, replace

the unit free of charge provided that:

 The product is returned to us or our

authorised repairers with evidence of date

of purchase.

 The product has not been used for trade,

professional or hire purposes.

 The product has not been subjected to

misuse or neglect.

 The product has not sustained any

damage through foreign objects,

substances or accidents.

 Repairs have not been attempted by

anyone other than our authorised repair

distributors.

This guarantee is offered as an extra benefit

and is additional to your statutory rights.

AFTER SALES SERVICE FOR YOUR

BLACK & DECKER PRODUCT (UK,

AUSTRALIA AND NEW ZEALAND ONLY)

Black & Decker offers a nationwide network

of authorised service agents. The use of other

than genuine Black & Decker accessories and

parts may damage or reduce the performance

of your Black & Decker product and may also

endanger the user. The terms and conditions

of the warranty may also be effected.

OUR AFTER SALES SERVICE POLICY (UK,

AUSTRALIA AND NEW ZEALAND ONLY)

It is our aim that all Black & Decker customers

should be totally satisfied with their Black &

Decker product and after sales service, but if

help or advice is needed please contact a local

Black & Decker authorised repair agent

manager who will be happy to help. Full details

of our unique after sales service can be

obtained from any of our Black & Decker

authorised repair agents.

ACCESSORIES

The performance of any power tool is

dependent upon the accessory used. Black &

Decker accessories are engineered to high

quality standards and are designed to enhance

the performance of the power tool. Buying a

Black & Decker accessory will ensure that you

get the very best from your Black & Decker

power tool.

Black & Decker accessories available include

metal and stone cutting discs, grinding discs,

wire brushes and sanding discs.

TECHNICAL DATA

The level of sound pressure of this tool is in

accordance with EEC legislation. You must

wear ear protection when using this tool.

CD500 KG68 KG75

Disc diameter 115mm 115mm 115mm

Power input 680W 680W 750W

No load speed 10,000 10,000 10,000

rpm rpm rpm

Spindle size M14 M14 M14

Cable length 2m 3m 3m

1 2 3 4 5 6 7 8 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Black & Decker 3272 Manuel de service Page 3

Commentaires sur ces manuels