Black & Decker Heat Gun HOT AIR TOOL Manuel d'utilisateur Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
HOT AIR TOOL ENGLISH 4
WARNING: MAY CAUSE PROPERTY DAMAGE
OR SEVERE INJURY
1.Keep out of the reach of children.
2.Do not touch the nozzle while hot air tool is
on, severe burns will result. Wear gloves to
protect hands.
3.Keep moveable items secured and steady
while scraping.
4. Make sure hot air tool is cooled before storing.
5.Do not leave the hot air tool unattended, turn
off and unplug if you leave the work area.
WARNING: EXPLOSION OR FIRE
This hot air tool produces extremely high tem-
peratures (as high as 1100°F). It must be used
with caution to prevent combustible material
from igniting.
1.Keep the hot air tool in constant motion.
2.Use extreme caution if the other side of the
material being scraped in inaccessible, such
as house siding. Other hidden areas behind
walls, ceilings, floors, soffit boards, fascia, or
other panels may contain flammable materi-
als that could be ignited by the hot air tool
when working these locations. Check these
areas before applying heat and do not use if
flammable materials are present, or if you are
not sure. The ignition of these materials may
not be readily apparent and could result in
property damage and injury to persons.
3.Do not use near surfaces with cracks or near
metal pipes or flashing.
4.Do not use electric tools in the presence of
flammable liquids or gases.
5.Do not use near combustible materials such
as dry grass, leaves, and paper, which can
scorch and catch fire.
6.The nozzle becomes very hot. Do not lay the
hot air tool on flammable surfaces while
operating or after immediately shutting off.
Always set on a flat, level surface so the noz-
zle tip is directed upwards.
7.Do not use the hot air tool as a hair dryer.
WARNING: ELECTRIC, MAY CAUSE
PROPERTY DAMAGE, SEVERE INJURY OR
LOSS OF LIFE
1.Do not disassemble.
2. Do not work in wet areas or expose the hot air
tool to rain. Do not immerse.
3.To guard against electric shock do not have
bodily contact with grounded surfaces such
as pipes, ranges, radiators, aluminum ladders
or other grounded devices.
4.Do not carry by the cord. Inspect cord for
wear or damage.
5.Use only UL (CSA for Canada) listed exten-
sion cords rated for outdoor use.
6.If your hot air tool has a 3-prong plug in, do
not remove grounding pin.
In Canada an outlet adapter for a 3-prong plug
may not be used. Only use a grounded outlet
with this unit.
WARNING: DO NOT TRY TO REPAIR (OR
DISASSEMBLE) THE HOT AIR TOOL YOURSELF
Repairs should be performed by a qualified shop
familiar with this tool or return it to HOME RIGHT
(see warranty). Opening of the hot air tool while
under warranty by anyone not authorized does
void the warranty.
WARNING: PROP 65 WARNING
Handling the coated electrical wires of this prod-
uct exposes you to lead, a chemical known to
the State of California to cause birth defects or
other reproductive harm. Wash hands after use.
Important Safety Instructions
WARNING
Do not touch nozzle
when working.
Severe burns will result.
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 35 36

Commentaires sur ces manuels

Pas de commentaire