Black & Decker BDP2600 Manuel d'utilisateur Page 15

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 44
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 14
15 - ENG
NOTE: Using a pump protector/ win-
terizer or RV antifreeze is to provide
proper lubrication to the internal seals
of the pump regardless of temperature
or environment.
1. Obtain a funnel,
6 oz. (170 mL)
of RV antifreeze
and 16–36 inch
(40–91cm) of
garden hose
with a male
hose connec-
tor attached to one end.
NOTICE: Risk of property damage. Use
only RV antifreeze. Any other an ti freeze
is corrosive and can damage pump.
2. Disconnect spark plug wire.
3. Connect length of garden hose to
water inlet of pump.
4. Add RV antifreeze to hose as
shown.
5. Pull engine starter rope slowly sev-
eral times until an ti freeze comes
out of high-pressure hose con nec-
tion of pump.
6. Remove garden hose from water
inlet of pump.
7. Reconnect spark plug wire.
Pressure Washer
1. Drain all water from high pressure
hose, coil it, and store it in cradle
of the pressure washer handle.
2. Drain all water from spray gun and
wand by holding spray gun in a
vertical position with nozzle end
pointing down and squeezing trig-
ger. Store in gun holder.
3. Store chemical hose so it is pro-
tected from dam age.
4. If space is needed, remove handles
and replace as shown.
ACCESSORIES
DANGER: Risk of fluid injection.
When using replacement lances or
guns with this pressure washer, DO
NOT use a lance and/or lance/gun
combination that is shorter in length
than what was provided with this
pressure washer as measured from
the nozzle end of the lance to the
gun trigger.
NOTICE: The use of any other acces-
sory not recommended for use with
this tool could be hazardous. Use only
accessories rated equal to or greater
than the rating of the pressure washer.
SPECIFICATIONS
Model BDP2600
PSI Max 2600 (17926 kPa)
Operating PSI 2340 (16134 kPa)
GPM Max 2.5
Operating GPM 2.25
SERVICE INFORMATION
Do not return this product to your
retailer. Black & Decker offers a full
network of company-owned and autho-
rized service locations throughout North
America. All Black & Decker Service
Centers are staffed with trained person-
nel to provide cutomers with efficient
and reliable power tool service.
Whether you need technical advice,
repair, or genine factory replacement
parts, contact the Black & Decker loca-
tion nearest you.
To find your local service location, refer to
the yellow page directory under “Tools—
Electric” or call: 1-800-544-6986.
Vue de la page 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Commentaires sur ces manuels

Pas de commentaire