Black & Decker BDP2600 Manuel d'instructions télécharger pdf (Page 15)

15 - ENG

N001859

1. Obtain a funnel,

6 oz. (170 mL)

of RV antifreeze

and 16–36"

(40–91cm) of

garden hose

with a male

hose connec-

tor attached to one end.

CAUTION: Risk of property damage.

Use only RV antifreeze. Any other an ti-

freeze is corrosive and can damage

pump.

2. Disconnect spark plug wire.

3. Connect length of garden hose to

water inlet of pump.

4. Add RV antifreeze to hose as

shown.

5. Pull engine starter rope slowly sev-

eral times until an ti freeze comes

out of high-pressure hose con nec-

tion of pump.

6. Remove garden hose from water

inlet of pump.

7. Reconnect spark plug wire.

Pressure Washer

1. Drain all water from high pressure

hose, coil it, and store it in cradle

of the pressure washer handle.

2. Drain all water from spray gun and

wand by holding spray gun in a

vertical position with nozzle end

-

ger. Store in gun holder.

3. Store chemical hose so it is pro-

tected from dam age.

4. If space is needed, remove handles

and replace as shown.

ACCESSORIES

DANGER: Risk of fluid injection.

When using replacement lances or

guns with this pressure washer, DO

NOT use a lance and/or lance/gun

combination that is shorter in length

than what was provided with this

pressure washer as measured from

the nozzle end of the lance to the gun

trigger.

CAUTION: The use of any other acces-

sory not recommended for use with

this tool could be hazardous. Use only

     

than the rating of the pressure washer.

SPECIFICATIONS

Model BDP2600

PSI Max* 2600 (17926 kPa)

Operating PSI 2340 (16134 kPa)

GPM Max* 2.5

Operating GPM 2.25

* Water flow and maximum pressure

ratings determined in accordance

with PWMA standard PW101.

SERVICE INFORMATION

Do not return this product to your

retailer. Black & Decker offers a full

network of company-owned and autho-

rized service locations throughout North

America. All Black & Decker Service

Centers are staffed with trained person-

nel to provide cutomers with efficient

and reliable power tool service.

Whether you need technical advice,

repair, or genine factory replacement

parts, contact the Black & Decker loca-

tion nearest you.

To find your local service location, refer to

the yellow page directory under “Tools—

Electric” or call: 1-800-544-6986.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

Commentaires sur ces manuels

Pas de commentaire