Black & Decker 11BDE-315 Manuel d'instructions télécharger pdf (Page 9)

9 - ENG

ASSEMBLY

INSTRUCTIONS (FIG. 3)

1. Locate and remove all loose parts

from the carton.

2. With handle oriented as shown,

align grooves in carry handle (P)

with rails on top of pressure washer

and slide into place.

3A

P

3. Push as shown to further lock carry

handle into place.

3B

4. Align slots (BB) on back of storage

rack with ribs (AA) on back of

pressure washer.

5. Slide storage rack down until it

locks into place.

3C

AA

BB

6. Remove and discard the shipping

plug (L) from the outlet (K) on the

front of the machine.

ON OFF

L

K

3D

OPERATING INSTRUCTIONS

PRESSURE WASHER

TERMINOLOGY

PSI: Pounds per Square Inch. The

unit of measure for water pressure.

Also used for air pressure, hydraulic

pressure, etc.

GPM: Gallons Per Minute. The unit of

measure for the flow rate of water.

CU: Cleaning Units. GPM multiplied by

PSI. GPM x PSI = CU

Detergent Injection System: Mixes

cleaners or cleaning solvents with the

water to improve cleaning effectiveness.

Water Supply: All pressure washers

must have a source of water. The

minimum requirements for a water

supply are 20 psi and 5 gallons per

minute. If your water source is a well,

the garden hose length can only be 30

ft. (9 m) max.

WARNING: To reduce the

possibility of contamination always

protect against backflow when

connected to a potable water system.

DANGER: Risk of fluid injection

and laceration. When using the high-

pressure setting, DO NOT allow

the high-pressure spray to come in

contact with unprotected skin, eyes,

or with any pets or animals. Serious

injury will occur.

• Your washer operates at fluid

pressures and velocities high

enough to penetrate human and

animal flesh, which could result in

amputation or other serious injury.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Commentaires sur ces manuels

Pas de commentaire