Black & Decker 11BDE-315 Manuel d'instructions télécharger pdf (Page 20)

20- ENG

OPERATIONAL

ISSUE

POSSIBLE

CAUSE

SOLUTION

Connecting and

Disconnecting

the Spray Lance

NOTE: Due

to the high

pressures

produced by

your pressure

washer, the

lance must

seal tightly to

the gun. As

the result of

normal operation

the lance can

become difficult

to attach or

remove and

this process

may require

considerable

force.

To attach the Lance – apply steady downward

pressure on the lance (In the direction of the

trigger) while simultaneously twisting the

lance 90° counterclockwise. It may help if

you set the gun vertically on a flat surface

with the lance pointing upwards. The two

tabs on the end of the lance must be fully

inserted in the gun before the lance will twist

and lock. If this does not work then remove

the bayonet o-ring from the end of the lance

and attach the lance to the gun without the

o-ring in place. If the lance attaches to the

gun without the o-ring in place you will need

to replace the o-ring. Please contact our

customer service department at www.power-

washer.us or by calling 1-800-381-0999.

To remove the Lance – release any trapped

pressure in the gun / hose by turning the unit

OFF and squeezing the gun trigger. Apply

steady downward pressure on the lance (In the

direction of the trigger) while simultaneously

twisting the lance 90° clockwise. It may help

if you set the gun vertically on a flat surface

with the lance pointing upwards.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Commentaires sur ces manuels

Pas de commentaire