Black & Decker 11BDE-315 Manuel d'instructions télécharger pdf (Page 11)

11 - ENG

6

A

B

2. Remove the tank cap (W) present

on the back of the machine.

3. Fill the tank (J) with suitable

cleaning solution.

7

W

J

4. Place the Click-N-Clean

®

spray

lance into the Low Pressure Soap

position (S, fig. 4).

5. Squeeze the trigger and the

detergent will automatically

be mixed with the water and

dispensed from the nozzle.

NOTE: When the Click-N-Clean

®

nozzle is moved to the High Pressure

Jet Stream, High Pressure Wide Fan

Spray or High Pressure Turbo Spray

position (T, U or V), detergent will not

be dispensed.

6. When you have completed the

use of detergent, Fill and flush the

detergent tank with clear water

after use. See Storage for correct

procedure.

7. See Storage section in this manual

for proper shutdown and storage

procedures

Cleaning techniques

When cleaning with the pressure washer,

some cleaning tasks can be solved with

water alone, but for most tasks it is

advantageous to use a detergent. A

detergent ensures a quick soaking of

the dirt allowing the high pressure water

to penetrate and remove the dirt more

effectively.

Application of detergent

CAUTION: Avoid working on hot

surfaces or in direct sunlight to mini-

mize the chance of the soap damaging

painted surfaces.

CAUTION: Damage may occur to

painted surface if soap is allowed to dry

on the surface. Wash and rinse a small

section at a time.

1. Apply the solution to a DRY work

surface.

NOTE: WETTING THE SURFACE

FIRST IS NOT RECOMMENDED,

AS IT DILUTES THE DETERGENT

AND REDUCES ITS CLEANING

ABILITY.

On a vertical surface, apply soap

horizontally from side to side

starting from the bottom to avoid

streaking.

2. Allow detergent to remain on the

surface for a short time before

rinsing.

3. Rinse with clean water under high

pressure. On a vertical surface,

first rinse from the bottom up, then

rinse from the top down. Hold

nozzle 6–8 in. (15–20 cm) from the

work surface at a 45° angle using

the flat spray as a peeling tool

rather than a scrub brush.

NOTE: Ensure that the detergent

injection system is completely clean

prior to switching from one detergent

to another.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Commentaires sur ces manuels

Pas de commentaire