Black & Decker 11BDE-315 Manuel d'instructions télécharger pdf (Page 10)

10- ENG

Leaks caused by loose fittings or

worn or damaged hoses can result

in injection injuries. DO NOT TREAT

FLUID INJECTION AS A SIMPLE

CUT! See a physician immediately!

PRESSURE WASHER

OPERATING FEATURES

CLICK-N-CLEAN

®

SPRAY LANCE

(Fig. 4)

WARNING: Do not move the nozzle

to adjust spray while the trigger is

squeezed.

The Click-N-Clean

®

4 n 1 nozzle has

four spray settings. Turn the collar 90°

to the desired position.

S.

The Low Pressure

Soap position is

intended for dispen-

sing detergent.

T.

The High Pressure Jet

Stream position is

intended for cleaning

with high pressure.

U.

The High Pressure

Wide Fan Spray

position is intended for

clea ning with high

pressure.

V.

The High Pressure

Turbo Spray position

is intended for optimal

cleaning.

NOTE: The pressure of the spray on

the surface you are cleaning increases

as you move the wand closer to the

surface.

S

U

V

T

4

NOTE: The pressure of the spray on

the surface you are cleaning increases

as you move the wand closer to the

surface.

CAUTION: The High Pressure

Jet Stream spray position is very

aggressive. We recommend that for

most cleaning applications a fan spray

pattern (U or V) be used to avoid

damage to the surface being sprayed.

POWERSWIVEL

®

FAN SPRAY WAND

(FIG. 5)

CAUTION: The red nozzle portion of

the lance pivots 360°. This adjustment

can only be made when the gun trigger

is completely released. Do not attempt

to adjust the nozzle when the machine

is in operation. Failure to follow this

instruction could result in personal

injury.

The nozzle pivots 360° and delivers a

high pressure fan spray pattern to clean

hard to reach areas.

R

5

USING DETERGENT (FIG. 6–7)

NOTICE: Use only approved pressure

washer cleaners. Do not use bleach,

chlorine, or any cleaners containing

acids.

NOTICE : Fill and flush the detergent

tank with clear water after use.

1. Insert the spray lance (B) into the

gun (A) by pushing firmly and

simultaneously twisting a 1/4 of a

turn counterclockwise until locked

into place.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Commentaires sur ces manuels

Pas de commentaire