Black & Decker Trimmer GH3000 Manuel d'utilisateur télécharger pdf (Page 6)

heavy enough to carry the current your product will draw. An undersized cord will cause a drop

in line voltage resulting in loss of power and overheating. The table shows the correct size to use

depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge.

The smaller the gauge number, the heavier the cord. If the extension will be used outside, the

cord must be suitable for outdoor work. The letters “WA” on the cord jacket indicate that the cord

is suitable for outdoor use.

FUNCTIONAL DESCRIPTION (FIGURE A)

1. On/Off Trigger Switch 4. Auxiliary Handle 7. Trimmer Head

2. Handle 5. Height Adjust Locking Clamp 8. Edge Guide Wheel

3. Power Cord Plug 6. Trimmer Guard 9. Spool Housing

ASSEMBLY

ASSEMBLY TOOLS REQUIRED (NOT SUPPLIED): Phillips Screwdriver

WARNING:

UNPLUG THE APPLIANCE BEFORE ATTEMPTING TO ATTACH THE GUARD.

ATTACHING THE GUARD (FIGURES B, C)

WARNING: NEVER OPERATE APPLIANCE WITHOUT GUARD FIRMLY IN PLACE.

The guard must always be properly attached on the appliance to protect the user.

• Removethescrewfromtheguard.

• Keepingtheguardsquaretothetrimmerheadslideitintoplaceuntiltheretainingtabclicks

into place (Ensure that the guide rails (B1) on the guard (B2) are correctly aligned with the

guide rails (B3) on the trimmer head (B4) (figure B).

• Securetheguardwiththescrew(C1) (figure C).

ATTACHING THE AUXILIARY HANDLE (FIGURES D, E)

• Toattachthehandle,pressinonthebuttons(D1) on both sides of the upper housing as

shown in figure D.

•

Position the handle as shown in figure E(withtheBlack&Deckerlogofacingupward).Partially

push the handle on so that it will hold the buttons in when you release them with your hand.

• Pushthehandlecompletelyontothehousingandpositionitslightlyuntilit“snaps”into

place (figure E).

•

To adjust the handle up or down, press in on the button (F1) and raise or lower the handle.

• Thehandleshouldbeadjustedsothatyourfrontarmisstraightwhenthetrimmerisinthe

working position.

ADJUSTING THE HEIGHT OF THE APPLIANCE (FIGURE G)

This appliance has a telescopic mechanism, allowing you to set it to a comfortable height.

To adjust the height setting:

• Releasetheheightadjustlockingclamp(G1).

• Gentlypullthetube(G2) up or down to the desired height.

• Closetheheightadjustlockingclamp(G1).

OPERATION

WARNING: Always use proper eye protection that conforms to ANSI Z87.1 (CAN/CSA

Z94.3) while operating this power appliance.

WARNING: Disconnect the plug from the power source before making any assembly,

adjustments or changing accessories. Such preventive safety measures reduce the risk of

starting the appliance accidentally.

CAUTION: Beforeyoubegintrimming,onlyusetheappropriatetypeofcuttingline.

CAUTION: Inspect area to be trimmed and remove any wire, cord, or string-like objects

which could become entangled in the rotatinglineorspool.Beparticularlycarefultoavoidany

wire which might be bent outwardly into the path of the appliance, such as barbs at the base

of a chain link fence.

SWITCHING ON AND OFF (FIGURE H)

WARNING: Never attempt to lock the trigger switch in the on position.

• Toturntheapplianceon,squeezethetriggerswitch(H1)

• Toturntheapplianceoff,releasethetriggerswitch(H1).

EXTENSION COrd rETaINEr (fIgurE I)

WARNING: Ensure the trigger switch is not engaged to reduce the risk of starting the

appliance accidentally.

A cord retainer is incorporated into the rear of the handle on the power head.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Black & Decker Trimmer GH3000 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Black & Decker Trimmer GH3000