Black & Decker GL660 Manuel d'instructions Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
14
Only use the appropriate type of
Black & Decker cutting line. Ensure that
cutting line is present in both sections of
the spool (fig. P).
TROUBLESHOOTING
If your tool seems not to operate properly, follow
the instructions below. If this does not solve the
problem, please contact your local Black & Decker
repair agent.
Before proceeding, unplug the tool.
Tool runs slowly
Check that the spool housing can rotate freely.
Carefully clean it if necessary.
Check that the cutting line does not protrude
more than 9 cm from the spool housing. If it
does, cut it off so that it just reaches the line
trimming blade.
Automatic line feed does not work
Keep the tabs depressed and remove the
spool cover from the housing.
Pull the cutting line until it protrudes 9 cm from
the housing. If insufficient cutting line is left on
the spool, install a new spool of cutting line as
instructed above.
Align the tabs on the spool cover with the
holes in the housing.
Push the cover onto the housing until it snaps
securely into place.
If the cutting line protrudes beyond the
trimming blade, cut it off so that it just reaches
the blade.
If the automatic line feed still does not work or the
spool is jammed, try the following suggestions:
Carefully clean the spool cover and housing.
Remove the spool and check if the lever can
move freely.
Remove the spool and unwind the cutting line,
then wind it on neatly again as described
above. Replace the spool as instructed.
PROTECTING THE ENVIRONMENT
Should you find one day that your tool
needs replacement, or if it is of no further
use to you, think of the protection of the
environment. Black & Decker repair agents
will accept old Black & Decker tools and
ensure that they are disposed of in an
environmentally safe way.
GUARANTEE
The Black & Decker lawn and garden guarantee
provides: 36 months parts and 12 months
labour cover in the UK, 24 months parts and
labour cover in South Africa, Australia and New
Zealand. Proof of purchase will be required.
Should your Black & Decker product become
defective within the guarantee period due to
faulty materials or workmanship, we guarantee to
either replace all defective parts or -at our
discretion- to replace the unit free of charge,
provided that:
The product is returned to us or one of our
authorised repair agents with proof of purchase.
The product has been used within the
parameters of its consumer classification.
The product has not been used for hire
purposes.
Repairs have not been attempted by anyone
other than our authorised repair agents.
The failure represents normal wear and tear.
This guarantee is offered as an extra benefit and
does not affect your statutory rights.
The guarantee policy
The following failures are not covered by the
above guarantee:
Replacing worn or damaged blades, nylon
lines, chains and power cables. These items
are regarded as replacement items which wear
during normal usage.
Failures as a result of sudden impact or
obvious abuse.
Failures due to usage not in accordance with
instructions and recommendations contained
in this manual.
ENGLISH
GL650_UK.PM5 07-11-2000, 15:2014
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire