Black & Decker GA100 Manuel d'instructions Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
2
Shredder
GA100 Instruction Manual
Recycling garden and organic household
waste into useful compost makes good sense.
The Black & Decker compost shredder quickly
reduces such waste to a fraction of its original bulk
and to a size which will compost far quicker than
unshredded material.
For your safety and for best results, read the
whole of this leaflet carefully before using your
Garden Shredder! (H1)
Assembly (Fig. A)
A
Unpack and check the loose parts.
You should have:
1 funnel
1 shredder
3 support legs
1 2-core “female” Safe ‘n’ Tidy connector
(UK only)
1 bag containing:
1 spanner
1 hexagonal key
3 bolts, nuts and washers
1 bag containing:
2 screws
2 washers
Fit the funnel into the top of the shredder
in such a way that the slot width is at
right angles to the direction of the
discharge spout. Secure with the
2 screws and washers provided.
Note: The spanner and hex key should
be stored under the cover plate.
Assembling the legs (Fig. B)
B
To assemble the legs, you will need to use
the spanner provided. Turn the shredder so
that it is resting on the large funnel.
Taking the screws, nuts and washers
provided, secure the support legs in the
base of the unit, ensuring that the legs are
pointing outwards.
Materials suitable for shredding
The garden shredder will shred most forms of
organic waste to be found in the home and garden.
For instance, prunings, hedge trimmings, twigs,
organic garden waste, kitchen waste, paper and
cardboard can all be reduced to shreds quickly
and easily.
Do not feed the shredder with stones, glass, metal
objects, bones, plastics or rags (H5).
Do not shred roots covered in soil as the blades
become blunt very quickly.
Use the main feeder funnel for small branches and
twigs (up to
1
4"/6mm diameter) and thicker branches
(up to 1"/25mm diameter) should be inserted in the
side feeder.
Please refer to the section in this manual entitled
“Getting the best out of your shredder” for
further information.
Safety instructions
Electrical safety
Your machine is designed for use on AC (mains)
electrical supplies only. Do not attempt to use on
any other supply.
Plug your machine into a power point, never in a
light socket.
Do not leave your machine unattended whilst it
is connected to the electrical supply. Switch off
and remove the plug whenever you leave
your machine.
Always switch off and remove the plug from the
mains before cleaning, inspecting or adjusting
any part of the machine, before clearing a
blockage, if the supply cable has become
damaged or entangled, or before lifting, carrying
or storing (H8).
Switch off and remove the plug from the
socket to inspect your machine for damage
and to rectify any faults after a hard object
enters the machine or if the machine starts to
vibrate abnormally.
Do not move the shredder while the cutters are
still rotating.
Power supply cable
The power supply cable should be regularly
inspected for signs of damage or ageing and
only used if in good condition.
Vue de la page 1
1 2 3 4 5 6 7 ... 51 52

Commentaires sur ces manuels

Pas de commentaire