Black & Decker Oven WLBFHB Manuel d'utilisateur Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 19
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
Insert the charging/power adapter plug
into the charging/power port as shown in
figure C. Insert the plug end into a
standard 120 Volt 60Hz outlet. The red
Charging Indicator LED (6) will light to
indicate the unit is charging (figure C).
CAUTION: When disconnecting the
charger / power adapter from the light,
be sure to unplug the charger from the
outlet first, then disconnect the charger
cord from the light.
Notes: Charge or power this unit ONLY with the originally
supplied Class 2 transformer. Consult manufacturer for
replacement.
Battery Recycling
Battery is not user serviceable. Return this light to a
Black & Decker Authorized Service Center to recycle the battery.
WARNINGS: TO REDUCE THE RISK OF INJURY /
EXPLOSION
Do not dispose of product in fire as batteries inside
this product may explode or leak.
Do not expose the unit containing a battery to fire or
intense heat as it may explode.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling
Corporation) Seal on the nickel-metal hydride
battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have
already been paid by Black & Decker. In some areas, it is
illegal to place spent nickel-metal hydride batteries in the
8
OPERA
TING THE UNIT
Position the unit as desired.
Press the ON/LOW/HIGH switch one time for high
brightness power saving setting.
Press the switch a second time for low brightness setting.
Press the switch a third time to turn light off.
USING THE HANGING HOOK
The flexible hanging hook (1) allows you to position the Bright Bar
for convenient, hands-free operation as shown in figure B and B1
.
CAUTION: TO REDUCE THE RISK OF PROPERTY DAMAGE:
When hanging hook is in use, do not shake light.
When light is hung by the hanging hook, do not shake the light or
object that it is hanging from. Do not hang the light from any
electrical wires or anything that it is not secure.
Only use the hanging hook for hanging the Bright Bar
. The hanging
hook is not intended to support additional weight. Do not attach or
hang anything additional to the light or risk of breakage may occur.
RECHARGING THE UNIT
IMPORTANT: This unit is delivered in a partially charged state. Fully
charge unit for 24 hours before using for the first time.
7
B
C
6
B1
90549415 01 WLBFHB.qxp 6/9/09 2:36 PM Page 7
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 18 19

Commentaires sur ces manuels

Pas de commentaire