Black & Decker Dust Buster 90529140 Manuel d'instructions télécharger pdf (Page 7)

7

ENGLISH

USE

Charging the battery (fig. C)

◆ Make sure that the appliance

is switched off. The battery

will not be charged with the

on/off switch in the on

position.

◆ Place the appliance on the

charging base as shown.

◆ Plug in the charger. Switch on

at the mains.

◆ Leave the appliance to

charge for at least 16 hours.

Whilst charging, the charger may

become warm. This is normal and

does not indicate a problem. The

appliance can be left connected

to the charger indefinitely. When

the battery is fully charged,

the power consumption of the

charger is negligible.

Important! Place the appliance on

the charging base whenever it is

not in use. After fully charging the

battery, the average effective usage

time is approx. 8 to 15 minutes

(depeding on the model). It may

take several charging cycles before

the battery attains full capacity.

Do not charge the battery at

ambient temperatures

below 4 °C or above 40 °C.

Operating the appliance (fig. D)

◆ To switch on, slide the on/off

switch (1) forward.

◆ To switch off, slide the on/off

switch back.

Accessories (fig. E & F)

V4810/V4820/V7210/V9650

These models are supplied with

the following accessories (fig. E):

- a hard brush (8) for furniture

and stairs (not for V4820)

- a crevice tool (9) for confined

spaces

- a soft brush (10) for keyboards

and lamp shades (V4820)

V9650

Two additional accessories are

stored in a portable caddy located

in the charging base:

- a soft brush (10) for keyboards

and lamp shades

- an extendable crevice tool (11)

for longer reach in confined

spaces

To fit an accessory, proceed as

follows (fig. F):

◆ Take the accessories from the

appliance.

◆ Insert the appropriate

accessory into the front of the

appliance.

TROUBLESHOOTING

If the product does not work,

follow the instructions below.

If this does not solve the problem,

please contact your local

Black & Decker repair agent.

◆ Make sure the battery is fully

charged.

◆ If the battery cannot be

charged, check if the charger

is plugged in correctly and

the mains is working.

Make sure the on/off switch is

in the off position.

CLEANING AND

MAINTENANCE

Regularly clean the filters.

Cleaning the dust bowl and

filters (fig. G, H, I & J)

The filters are re-usable and

should be cleaned regularly.

◆ Press the release button (2)

and remove the dust bowl (3)

(fig. G).

◆ Remove any dust from the

dust bowl (fig. H).

◆ Remove the filters (12 & 13) by

twisting them clockwise (fig. I).

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire