Black & Decker Powerufl Solutions GKC1817L Manuel d'instructions télécharger pdf (Page 6)

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

b. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

c. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

d. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

make sure that the safety of the power tool is maintained.

Additional power tool safety warnings

The intended use is described in this instruction manual. Do

not use the tool for purposes not intended; for example do

not use the tool to fell trees. The use of any accessory or

attachment or performance of any operation with this tool

other than those recommended in this instruction manual

may present a risk of personal injury.

 Wear close fitting and protective clothing including a

safety helmet with visor/goggles, ear protectors, non-

skid safety footwear, protective bib trousers and strong

leather gloves.

 Always position yourself out of the path of falling

branches.

 The safe distance between a branch to be felled and

bystanders, buildings and other objects is at least 2 1/2

times the length of the branch. Any bystander, building

or object within this distance is at risk from being struck

by the falling branch.

 Pre-plan a safe exit from falling branches. Ensure the

exit route is clear of obstacles that would prevent or

hinder movement. Remember wet grass and freshly cut

bark is slippery.

 Ensure someone is nearby (but at a safe distance) in

case of an accident.

 Do not use the tool while standing in a tree, on a ladder

or on any other unstable surface.

 Keep proper footing and balance at all times.

 Hold the tool firmly with both hands when the motor is

running.

 Do not let the moving chain contact any object at the tip

of the guide bar.

 Start cutting only with the chain moving at full speed.

 Do not attempt to enter a previous cut. Always make a

fresh cut.

 Watch for shifting branches or other forces that could

close a cut and pinch or fall into the chain.

 Do not attempt to cut a branch when the diameter of the

branch exceeds the cutting length of the tool.

 Always remove the battery from the tool and place the

chain cover assembly over the chain when storing or

transporting the tool.

 Keep the saw chain sharp and properly tensioned.

Check the tension at regular intervals.

 Switch the tool off, allow the chain to stop and remove

the battery from the tool before carrying out any

adjustment, servicing or maintenance.

 Only use genuine replacement parts and accessories.

Warning! Additional safety warnings for compact

chainsaws.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Black & Decker Powerufl Solutions GKC1817L Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Tournevis sans fil Black & Decker Powerufl Solutions GKC1817L