Black & Decker PLR36NC Manuel de service télécharger pdf (Page 4)

b. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger speciﬁed by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of ﬁre when used

with another battery pack.

b. Use power tools only with speciﬁcally designated

battery packs. Use of any other battery packs may

create a risk of injury and ﬁre.

c. When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws, or other small metal objects,

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a ﬁre.

d. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, ﬂush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

6. Service

a. Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

ADDITIONAL POWER TOOL SAFETY WARNINGS

Warning! Additional safety warnings for

screwdrivers and impact wrenches

Hold power tool by insulated gripping surfaces

when performing an operation where the fastener

may contact hidden wiring or its own cord.

Fasteners contacting a "live" wire may make

exposed metal parts of the power tool "live" and

shock the operator.

Wear ear protectors with impact wrenches.

Exposure to noise can cause hearing loss.

Use auxiliary handles supplied with the tool. Loss

of control can cause personal injury.

Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body leaves

it unstable and may lead to loss of control.

Before driving fasteners into walls, ﬂoors or ceilings,

check for the location of wiring and pipes.

This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure

that they do not play with the appliance.

The intended use is described in this instruction

manual.

The use of any accessory or attachment or

performance of any operation with this tool other

than those recommended in this instruction manual

may present a risk of personal injury and/or damage

to property.

LABELS ON TOOL

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

ADDITIONAL SAFETY INSTRUCTIONS FOR

BATTERIES AND CHARGERS

BATTERIES

Never attempt to open for any reason.

Do not expose the battery to water.

Do not expose the battery to heat.

Do not store in locations where the temperature may

exceed 40 °C.

Charge only at ambient temperatures between 10 °C

and 40 °C.

Charge only using the charger provided with the

appliance/tool.

When disposing of batteries, follow the instructions

given in the section "Protecting the environment".

ENGLISH

1 2 3 4 5 6 7 8 9 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Black & Decker PLR36NC Manuel de service Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Tournevis sans fil Black & Decker PLR36NC