Black & Decker PLR36NC Manuel de service télécharger pdf (Page 3)

ENGLISH

––––––––––––––––––––––––––––––––––––––––––––––––––––––

PLR36NC

SCREWDRIVER

TECHNICAL DATA

SCREWDRIVER

Voltage

No Load Speed

Max. torque

Bit holder

Weight

Battery

Voltage

Battery type

AHr rating

Charger

Input voltage

Charging rate

Approx. Charging Time

min

-1

PLR36NC

3.6

180

6.35 (1/4”)

0.38

3.6

NiCd

0.8

220-240

0.04

INTENDED USE

Your Black & Decker hammer drill has been designed for

drilling in wood, metal and plastics and masonry . This

tool is intended for consumer use only.

GENERAL SAFETY RULES

WARNING! Read safety warnings and all

instructions. Failure to follow all instructions listed

below may result in electric shock, fire and/or serious

injury.

Save all warnings and instructions for furture

reference.The term “power tool” in all of the warnings

listed below refers to your mains operated (corded)

power tool or battery operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions cancause you

to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce

risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f. If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3 Personal safety

a. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious personal

injury.

b. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your finger on the switch or energising power tools

that have the switch on invites accidents.

d. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

e. Do not overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate

for which it was designed.

1 2 3 4 5 6 7 8 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Black & Decker PLR36NC Manuel de service Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Tournevis sans fil Black & Decker PLR36NC