Black & Decker PLR36NC Manuel d'instructions télécharger pdf (Page 6)

Screwdriving

u Select forward or reverse rotation using the forward/

reverse slider (2).

u To switch the tool on, press the on/off switch (1).

u To switch the tool off, release the on/off switch (1).

LED light

The LED light (6) is activated automatically when the on/off

switch (1) is depressed. The LED light will also activate when

the forward/reverse slider (2) is set to the centre position and

the on/off switch (1) is depressed.

Hints for optimum use

u Let the tool work at its own pace. Do not overload.

u Always use the correct type and size of screwdriver bit.

u If screws are difcult to tighten, try applying a small

amount of washing liquid or soap as a lubricant.

u Use the auto spindle lock to loosen very tight screws or to

rmly tighten screws.

u Always hold the tool and screwdriver bit in a straight line

with the screw.

u When screwing in wood, it is recommended to drill a pilot

hole with a depth equal to the length of the screw. A pilot

hole guides the screw and prevents splintering or

distortion of the wood. For the optimum size of the pilot

hole, refer to the table below.

u When screwing in hardwood, also drill a clearance hole with

a depth equal to half the length of the screw. For the

optimum size of the clearance hole, refer to the table below.

Screw size Pilot hole ø Pilot hole ø Clearance hole

(softwood) (hardwood)

No. 6 (3.5 mm) 2.0 mm 2.5 mm 4 mm

No. 8 (4 mm) 3.2 mm 3.5 mm 5.0 mm

No. 10 (5 mm) 3.5 mm 4.0 mm 5.7 mm

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the

performance of your tool. By using these accessories you will

get the very best from your tool.

This tool uses screwdriver bits with a 1/4" (6.35 mm)

hexagonal shank.

Maintenance

Your Black & Decker tool has been designed to operate over a

long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

u Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker ofce at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet at:

www.2helpU.com

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Black & Decker PLR36NC Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Tournevis sans fil Black & Decker PLR36NC