Black & Decker GTC650L Manuel d'instructions télécharger pdf (Page 6)

ENGLISH

(Original instructions)

♦ Always ensure that all guards are tted when using the

tool. Never attempt to use an incomplete tool or a tool

with unauthorised modications.

♦ Never allow children to use the tool.

♦ Be aware of falling debris when cutting the higher slides

of a hedge.

♦ Always hold the tool with both hands and by the handles

provided.

Safety of others

♦ This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning the use of the appliance by a person

responsible for the their safety.

♦ Children should be supervised to ensure that they do not

play with the appliance.

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by EN

60745 and may be used for comparing one tool with another.

The declared vibration emission value may also be used in a

preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool:

To reduce the risk of injury, the user must read the

instruction manual.

Wear safety glasses or goggles when operating

this tool.

Do not expose the tool to rain or high humidity.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

♦ Injuries caused by touching any rotating/moving parts.

♦ Injuries caused when changing any parts, blades or

accessories.

♦ Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take regular

breaks.

♦ Impairment of hearing.

♦ Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Additional safety instructions for batteries and chargers

Batteries

♦ Never attempt to open for any reason.

♦ Do not expose the battery to water.

♦ Do not expose the battery to heat.

♦ Do not store in locations where the temperature may

exceed 40°C.

♦ Charge only at ambient temperatures between 10°C and

40°C.

♦ Charge only using the charger provided with the

appliance/tool. Using the wrong charger could result in an

electric shock or overheating of the battery.

♦ When disposing of batteries, follow the instructions given

in the section “Protecting the environment”.

♦ Do not damage/deform the battery pack either by

puncture or impact, as this may create a risk of injury

and re.

♦ Do not charge damaged batteries.

♦ Under extreme conditions, battery leakage may occur.

When you notice liquid on the batteries, carefully wipe the

liquid off using a cloth. Avoid skin contact.

♦ In case of skin or eye contact, follow the instructions

below.

Warning! The battery uid may cause personal injury or

damage to property. In case of skin contact, immediately

rinse with water. If redness, pain or irritation occurs

seek medical attention. In case of eye contact, rinse

immediately with clean water and seek medical attention.

Chargers

Warning! Your charger has been designed for a

specic voltage. Always check that the mains voltage

corresponds to the voltage on the rating plate.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Black & Decker GTC650L Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Taille-haie sans fil Black & Decker GTC650L