Black & Decker KS600E Manuel d'instructions télécharger pdf (Page 11)

Intended use

Your Black & Decker jigsaw has been designed for sawing

wood, plastics and sheet metal. This tool is intended for

consumer use only.

General safety rules

Read all instructions. Failure to follow all instructions listed

below may result in electric shock, fire and/or serious injury.

The term "power tool" in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

1. Work area

a. Keep work area clean and well lit. Cluttered anddark

areas invite accidents.

b. Donotoperate powertoolsinexplosive atmospheres,

suchasinthepresenceofflammableliquids,gasesor

dust.Power toolscreate sparkswhich may ignitethedust

orfumes.

c. Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

2. Electrical safety

a. Power toolplugs must match theoutlet.Never modify

thepluginanyway.Donotuseanyadapterplugswith

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduc e risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if

your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water enteringapower tool willincrease the riskof electric

shock.

d. Donotabusethecord.Neverusethecordforcarrying,

pulling orunplugging thepowertool. Keepcordaway

fromheat,oil,sharpedgesormovingparts. Damagedor

entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, usean

extension cord suitable for outdoor use. Use of a cord

suitable foroutdoor use reduces the risk of electric shock.

3. Personal safety

a. Stayalert,watchwhatyouaredoingandusecommon

sense when operating a power tool. Do not use a

power tool while you aretired or under theinfluence

ofdrugs,alcoholormedication. Amomentofinattention

while operating power tools may result in serious personal

injury.

b. Use safety equipment. Always wear eye protection.

Safety equipmentsuchas dustmask, non-skid safety shoes,

hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c. Avoid accidental starting. Make sure that the switch

isin the off positi on beforeplugging in. Carrying power

tools with your finger on the switch or plugging in power

tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part ofthe power tool mayresult in personal injury.

e. Donot overreach. Keep proper footing and balance at

all times. Thisenables better control of the power tool in

unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and co llection facilities, make sure that

these are connected and properly used. Use of these

devices can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will do

the job better and safer atthe rate for which it was designed.

b. Donot use the powertooliftheswitch doesnot turnit

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idlepowertools outofthereachofchildrenand

donotallow pers ons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Manyaccidents are caused by poorly

maintained powertools.

f. Keepcuttingtools sharp and clean. Properlymaintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and tool bits etc., in

accordancewiththeseinstructionsandinthemanner

intended for the particular type of power tool, taking

into account the working conditio ns and the work to

be performed. Use of the power tool for operations

ENGLISH

1 2 ... 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Black & Decker KS600E Manuel d'instructions Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à chaîne sans fil Black & Decker KS600E