Black & Decker DCME10 Manuel d'utilisateur Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 15
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
4
How to Use
This product is for household use only.
GETTING STARTED
1. Remove all stickers, packing material, and literature.
2. Wash the carafe, filter basket and carafe lid in warm, sudsy water; rinse
thoroughly.
3. Pour cold water up to the 9-cup level mark into the water reservoir and brew it
through as instructed in “BREWING A POT OF COFFEE,” but do not add coffee
grounds to the paper filter.
4. When done, turn off the coffeemaker and discard paper filter and the water
from the carafe.
Important: For warranty verification, please do not remove line cord sticker.
BREWING A POT OF COFFEE
You don't have to set the clock or program the coffeemaker to
brew coffee.
1. Lift the one-piece cover and use the water-fill markings on
the carafe to fill the water reservoir with cold water to your
desired level (A).
2. Place a No. 4 cone-shaped paper filter into the filter
basket. Be sure filter basket is secured. Align small posts on
both sides of the filter basket with grooves on the inside of
brew basket, press down on filter basket and turn
counterclockwise (B).
3. Add ground coffee to the desired level (we recommend
one heaping tablespoon for every 2 cups) and close the
cover.
Note: We recommend you use only a No. 4 cone-shaped paper filter with this
coffeemaker.
4. Place the carafe on the "Keep Warm" plate and plug in the unit.
5. Press On/Off button and the indicator light comes on indicating coffee is
brewing. The display momentarily shows the default time of 1:59 for the "Keep
Warm" Plate. When you release the On/Off button, the indicator light stays on
and clock flashes 12:00 a.m.
6. Press the On/Off button to turn off the coffeemaker. When brewing is complete
and/or all coffee has been served the indicator light goes out indicating the
coffeemaker has been turned off.
7. Replace the carafe on the "Keep Warm" plate when not serving to keep coffee
hot. The "Keep Warm" plate holds coffee at serving temperature for 2 hours and
then automatically shuts off.
Sneak-A-Cup
®
Interrupt Feature
You can pour a cup of coffee while coffee is brewing without
leaking from the brew basket.
When finished pouring coffee, place the carafe under brew
basket. The brewing process continues (C).
Important: To avoid possible overflow after removing the
carafe, be sure to replace the carafe under the brew basket
within one minute or less.
3
Product may vary slightly from what is illustrated.
1. One-piece cover
2. Water spreader
3. Water reservoir
4. Water window with cup level
markings
5. Cord storage (inside of unit)
6. Control panel
7. "Keep Warm" plate
8. Water-fill/brewed-coffee markings
†9.10-cup/50 oz. (1479 ml) carafe
(Part #9016002-W4116-3 (w)
9016002B10 (b))
†10. Carafe lid (Part # 12160-08(w)
12160-08 (b))
11. Brew basket
†12. Removable filter basket
(Part # 12160-07(w) / 12160-07 (b))
1. Digital display
2. ON indicator light
3. ON/OFF (1/0) button
4. MIN button
5. HOUR button
6. PROG button
A
B
C
CONTROL PANEL
Posts
Grooves
DCME10.Pub178918RV01 3/16/05 12:08 PM Page 4
Vue de la page 2
1 2 3 4 5 6 7 8 ... 14 15

Commentaires sur ces manuels

Pas de commentaire