Black & Decker BDCMTTS-XE Manuel d'instructions télécharger pdf (Page 7)

Secure the workpiece to a stable platform as shown in Figure

D. It is important to support the work properly to minimize body

exposure, blade binding, or loss of control.

ASSEMBLY/ADJUSTMENT SET-UP

WARNING:

To reduce the risk of injury, always remove battery from saw before any of the

following adjustment operations.

ATTACHING AND REMOVING THE BLADE:

FIGURE E & F

• Retract lower guard and assemble blade (7) and clamp

washer (9) as shown in Figure E.

• Depress the spindle lock (3) while turning the saw spindle

with the blade wrench (4) until the blade lock engages and

the blade stops rotating as shown in Figure F.

NOTE: Blade wrench is stored on the saw as shown in

Parts and Features.

• Tighten the blade clamping screw (10) securely with the

blade wrench.

NOTE: Never engage the spindle lock while the saw is

running, or engage in an effort to stop the tool. Never turn

the tool on while the spindle lock is engaged. Serious

damage to your saw will result.

LOWER BLADE GUARD

WARNING:

Laceration Hazard. The lower blade guard is a safety feature which reduces

the risk of serious personal injury. Never use the saw if the lower guard is missing, damaged,

mis-assembled or not working properly. Do not rely on the lower blade guard to protect you

under all circumstances. Your safety depends on following all warnings and precautions as

well as proper operation of the saw. Check lower guard for proper closing before each use as

outlined in Additional Safety Rules for Circular Saws. If the lower blade guard is missing or not

working properly, immediately discontinue use of the saw, and take it to a qualied service

dealer for possible repair.

ENGLISH

(Original instructions)

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Black & Decker BDCMTTS-XE Manuel d'instructions Page 7