Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur télécharger pdf (Page 25)

BW Defender2

User Manual

Confidence Beep

The Confidence Beep tells you the Detector is ON and the

battery has sufficient power respond to a hazardous level of

gas and emit an alarm. Instead of beeping when the battery’s

power is low, the audible alarm beeps to advise you the

battery has sufficient power. The Confidence Beep stops

when the battery power is low.

You can only activate the Confidence Beep at startup.

To turn on the Confidence Beep:

1. If the detector is on, deactivate the detector.

2. Press A and simultaneously.

After the self-test completes, the detector continuously beeps

once every 5 seconds.

⇒ To turn off the Confidence Beep, turn off, and then

restart the detector.

User Option Menu

User options are:

1. Finish options and exit User Options Menu.

2. Set latching alarm function

3. User Downloadable Datalogger model only:

Adjust real-time clock and calendar.

4. Enable or disable operation of one or more

sensors.

5. Enable or disable Pass Code Protection.

To access the User Options press

G and H simultaneously until the

display reads:

To choose the desired options

press H or G. Press

to select the option.

To exit the options menu and return

to normal operation at any time,

press when the display

shows Finish Options.

For options 4 and 5, see "User Options" (P. 40).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 70 71

Pas de commentaire

Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur Page 25