Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur Page 63

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 72
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 62
GasAlertMax
Troubleshooting
Troubleshooting
The detector’s electronics are protected from variations in
humidity and corrosive atmospheres. If you encounter a
problem, try the solutions listed in the following table.
If you still are unable to correct the problem, contact
BW
Technologies.
Table 15. Troubleshooting Tips
Problem Possible Cause Solution
The detector does not activate. No battery
Depleted battery
Damaged or defective detector
Install battery
Replace battery
Contact BW Technologies
The detector enters alarm
immediately when it is activated.
Sensor needs to stabilize
Low battery alarm
Sensor alarm
Pump alarm
Used sensor: wait 60 seconds
New sensor: wait 5 minutes
Replace battery
Replace sensor
If the sampling hose is attached,
determine if it is obstructed. If it is not,
clean or replace the pump filter. If this
does not work, see the
Pump Alarm
section or
contact BW Technologies
53
Vue de la page 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 71 72

Commentaires sur ces manuels

Pas de commentaire